Blackmagic Camera Support

Product Code: eq27660
Availability: In Stock

$93.00 $122.76

Qty

6 reviews Write a review

Description
Reviews (6)

Stabilize your camera on irregular surfaces like uneven ground, vehicles, or tree limbs with the blackmagic camera supportUse by laying it flat to support a longer lens, or folded in half to provide additional height. Constructed from water-resistant Cordura in forest green camo, a nonslip grip material covers the entire bottom surface, as well as the gusseted edges, to minimize unwanted movement. Secure your camera one step further with the four d-ring attachment points allowing performance in the most rugged environments.

The LensSack ships empty, allowing you to use separately-purchased poly pellets, dried beans, or even sand and dirt found on location. The YKK locking zipper withstands harsh elements, keeping the fill of your choice from leaking. A built-in adjustable strap doubles as a carry handle for added convenience when transporting in the field.

Irregular Surface Support Stabilizes Gear Water-Resistant Cordura Adjustable Carry Handle Four D-Ring Attachment Points Ships Empty

Parameters
Item Type	1x Beanbag (Empty)
Color	Camouflage
Type of Closure	Zipper
Materials	Cordura
Dimensions	15 x 8" / 38.1 x 20.3 cm
Weight	5 oz / 142 g
Packaging Info
Package Weight	0.395 lb
Box Dimensions (LxWxH)	8.5 x 8.45 x 2.05"

Related Questions and Answers

Q: 1. What is the maximum load capacity?

A: The maximum load capacity of the Platypod Extreme is 22lbs.

Q: 2. Will this work with a NEX_FS700?

A: Hello Christian,Our Composite F3 could work with the FS700, but since that camera has a viewfinder which is centered behind the camera, unless you're going to shoot with an EVF attached on the side, you might find the configuration a bit awkward. May we suggest you take a look at our COMPOSITE STABILIZER... this configuration is offset, therefore allowing you to have the camera's viewfinder in front of you.a href= http://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates/dslr-camera-supports/composite/dslr-stabilizer_3.aspx?id_page_parent=1 target= _blank http://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates/dslr-camera-supports/composite/dslr-stabilizer_3.aspx?id_page_parent=1/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 3. What is the weight of the product?

A: Hello Lauren, Thank you for your question! The Composite C300 Camera Support Bundle weighs in at 13.8 lbs.

Q: 4. Which follow focus models work with this rig? The riser seems like it could create issues depending on the model.

A: We recommend some of the heftier follow focus systems like ones made by Bright Tangerine, OConnor, ARRI, Movcam, Wooden Camera, Chrosziel, Vocas, and Tilta.

Q: 5. How does this work with a Canon C200?

A: You could use this system with the C200. However the baseplate is really geared more towards use with a DSLR or smaller camcorder. The SHAPE Offset Rig for Canon EOS C200 would be a much better option, BH #SHC200OF. https://bhpho.to/2Z9dT2V

Q: 6. is this composite grip work with Sony HXR-NX5U?

A: Hello Phong,Thank you for your question! Our COMPOSITE GRIP will indeed work with this camera. Although not designed specifically for it, our unit will allow you to attach it on the main baseplate and use the LCD viewfinder with ease. You will be able to install the COMPOSITE GRIP on a tripod by attaching its quick release plate underneath the main baseplate as well.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 7. Will this unit handle the weight and size of a Panasonic AG-DVX200 Camcorder?

A: Hello DouglasThank you for contacting us! Indeed our COMPOSITE F3 will handle the specs of this camera. You may also want to look at our REVOLT BP10 VCT UNIVERSAL BASEPLATE, which would allow you to position it directly on your shoulder. Take a look at our website for more information.a href= https://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates-and-shoulder-plates/baseplate-camera-supports/revolt-bp10-vct-universal-baseplate-shoulder-mount_959.aspx?id_page_parent=1300 target= _blank https://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates-and-shoulder-plates/baseplate-camera-supports/revolt-bp10-vct-universal-baseplate-shoulder-mount_959.aspx?id_page_parent=1300/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 8. any reason this Shape Composite F3 should not work with Panasonic HPX170?

A: Hi Tim. Thanks for your interest on SHAPE products. This setup will work with your camera. If your use your camera with the flip screen you'll able to comfortably work with it. If you like to use the camera viewfinder instead, you can add an OFF-SET bracket and a pair of 15mm by 6 inches rods in order to have a pleasant experience when shooting by long time. Thanks again for asking about SHAPE products. If you have further questions or need more information on how tu use SHAPE products in the future don't hesitate to ask again! Please have a good day.

Q: 9. Ok, great...but what exactly is in the box?

A: Hi, Jonathan thank you for your interest in our products.The box contains many different items that you will be able to find via the What's in the box section on our website: a href= http://www.shapewlb.com/en/product/products/shape-support/canon-eos-c100-c300-c500/composite-bundle-c300_300.aspx?id_page_parent=349 target= _blank http://www.shapewlb.com/en/product/products/shape-support/canon-eos-c100-c300-c500/composite-bundle-c300_300.aspx?id_page_parent=349/aIn this document , you will find everything you need to know and a description of all the items included in the box.I hope this will help. If you have any other questions don't hesitate to contact us!

Q: 10. Is this unit compatible with the use of a VCT plate?

A: Hello Sean, Thank you for your question! Unfortunately, these units are not designed to fit on a VCT plate sytem. If you want to use a VCT plate, we suggest you take a look at our REVOLT Universal Baseplate to see its amazing features. a href= https://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates/baseplate-camera-supports/revolt-bp10-vct-universal-baseplate-shoulder-mount-telescopic-handle_960.aspx?id_page_parent=1300 target= _blank https://www.shapewlb.com/en/product/camera-supports-and-accessories/baseplates/baseplate-camera-supports/revolt-bp10-vct-universal-baseplate-shoulder-mount-telescopic-handle_960.aspx?id_page_parent=1300/aWe hope this helps a bit and don't hesitate if you have more questions. We thank you for your interest in our products. The SHAPE team

Martin	29/09/2024
[0.395 lb] The Platypod eXtreme works very well. Just screw on my regular ball head and it's ready to go. Very sturdy and compact 5

JJV television	15/09/2024
[0.395 lb] We use it in a mobil unit with cameras x3 and up tu 800 mts. no problems at all.Keeps quiality the only problem is with the cables TC.. 5

DGould	04/08/2024
[Cordura] Each ATEM Camera Converter can send an HDSDI video and audio feed in both directions simultaneously. I use six of these units to permanently link three campus venues together. Three of them are connected to a BlackMagic Design 12 x 12 router that I can remotely control. The others reside in each venue. This gives the ability to send and receive a full quality HDSDI feed to and from each building. It works flawlessly. 5

Bruce	28/07/2024
[0.395 lb] I love using this base for holding led lights for macro…or for holding a camera low to the ground (with camera mount adapter). 5

Mr Walt	17/05/2024
[0.395 lb] I’m utilizing this in conjunction with the platyball ball head.This set up is just what I was looking for. A little learning curve due to the unique design of the instrument. I’m ultimately using this to stabilize and use with the new LEICA Q3. This is just what I was looking for, and I’m very pleased with the performance and portability this product delivers.Excellent product in my opinion. As always, excellent customer service and shipping. 5