Designed to eliminate the extra step of finishing the screen with trim, the 220V ceiling mount flat screenfrom ceiling mount flat screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does this fit the Ikegami HLM-905WR monitor?

A: I have been unable to get confirming information from Porta-Brace regarding the size of this bag. However, it is our opinion that yes, this will accommodate the Ikegami HLM-905WR monitor.

Q: 2. can it be used with a standard schedule 40 1-1/2" pipe? does it need to be threaded?

A: Yes this uses a standard NPT 1.5 threaded column.

Q: 3. Do the interior dimensions refer to the inner cable storage space? I am wondering, as they are less than a 19 flatscreen.

A: The main thing I can add to the great info that others have already provided, Kathy ...is to say that Gator's shock-mounting foam supports the ENTIRE perimeter of flat screens in sizes up to a maximum of 23 .The ingenious bit Greg D refers to is Gator's anchored Velcro strapping that firmly secures our screens face down on Gator's thin (but highly shockproof and scratch-preventing) removable flooring system ...which itself then combines with the monitor's entire face to form a lid over a separate accessory box that's framed by (and has its depth determined by) the thickness of that high density shock-mount foam.FYI, the accessory box of my G-MONITOR-GO22 currently contains my Samsung's wall wart plug pack, its remote control, a fat 10 metre HDMI cable, a 10 metre USB cable, sundry adapters (VGA, thunderbolt/mini display port, BNC etc) ...and a trackball.

Q: 4. Will this fit a BenQ 9H.LE5LB.QPA 9H.LE5LB.QPA 21.5-Inch monitor?

A: Yes it should, this case works with Flat Screen Monitors up to 22 inches. A 21.5 Inch monitor should fit in it fine.

Q: 5. How much does this case weigh?

A: According to SKB, this case weighs 18.82 kg / 41.5 lbs.

Q: 6. Is this easy to set up and take down at a trade show?

A: Couldn't be easier.

Q: 7. Is this case strong enough to use as checked luggage on an airplane?

A: I have a lot of confidence in the case but haven't flown with it. I would feel comfortable checking it as long as I added some extra, dense latex foam. If they throw anvil cases on top of it, you'd be in trouble because the large front and back sides are thin-ish plastic covered with strong cordura. The short sides and corners are very strong. I love the case but, again, haven't flown with it.

Q: 8. Does this come with any mounting hardware (nuts & bolts)?

A: The On-Stage FPS6000 Air-Lift Flat-Screen Mount for Displays up to 42" BH #ONFPS6000 includes a package of mounting hardware.

Q: 9. Does this stand come with screws to fit various TV's?

A: The Mount-It! Tripod Stand for 32 to 70" Flat Screen Displays BH #MOMI874 would come with the hardware needed to mount most TV's.

Q: 10. I'm considering this case for a Dell 24 computer monitor (P2415Q). Will it accommodate the attached stand and base?

A: Yes, it should not be a problem. We use it for a Lenova All-In-One 23 inch PC which has a stand with a wider base than the Dell monitor and it fits fine. Plenty of room for accessories also. The interior foam allows for a great deal of individualization.