Designed to eliminate the extra step of finishing the screen with trim, the 120V ceiling mounted projector screenfrom ceiling mounted projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can I connect 2 of these speakers to a computer?

A: These speakers require a Supply Voltage of 24 V DC and would not be suitable for direct connection to a computer.

Q: 2. Does this come with a filter pouch?

A: Yes it does come with a pouch.

Q: 3. Can this be adjusted by pulling on it, or is it in fixed position and one would have to tinker with each joint to move it?

A: Yes, the Godox VSM-B01 Desk-Mounted Boom Arm can be adjusted by pulling on the arm and moving it into the desired position.

Q: 4. Can the boom are be swiveled/panned flush against the wall or not? I see conflicting responses. Some say yes, others say no. One reviewer stated that he 'wished it would pivot 180 degrees'. Specifically, with nothing mounted to the end of the boom, can the boom arm pivot on the mounting bracket so that the spigot end goes all the way to the wall? Or does the design of the mounting bracket/pivot bolts prevent it from rotating that far?

A: Yes. When fully extended the boom arm offers the flexibility of 180° of tilt and 170° of pan movement. Length is adjustable via a locking ratchet handle, and a locking knob on the support tube provides for extra reinforcement for your payload.

Q: 5. What are the dimensions of the wall mounting bracket?

A: The Impact 7 ft HD Wall-Mounted Boom Arm is 46.18 x 8.78 x 4.78 inches.

Q: 6. Does this fold downward to be flat against the wall? (Not side to side)

A: The Impact 7 ft HD Wall-Mounted Boom Arm to be flat on on the wall is side to side. Not up or down.

Q: 7. Can I use a double-ended spigot to put a Teradek bolt above and a small cigar mic below?

A: You should be able to use one double-sided spigot on top for the Teradek Bolt and one on the bottom for the mic. The total weight of the gear would not exceed the arm's 12 lb. maximum capacity.

Q: 8. Each preview image displays a different item. Does the actual item for sale have the two additional holes allowing for a 90º pivot? Thanks

A: According to the Peerless-AV literature this mount does have the two holes for 90 degree pivot: https://docs.peerless-av.com/BOOK8.5X11IN-120-9142-1-4-1.PDF

Q: 9. can a ring light be attached to this mount?

A: If your ring light has the standard 5/8" light stand receptacle on the bottom of the light fixture, then yes, it would be able to connect to the Impact 7 ft HD Wall-Mounted Boom Arm. If the ring light you own does not have a 5/8" receptacle, then you would need an adapter that converts the standard 5/8" baby stud on the boom arm to the connection used by your ring light.

Q: 10. How does it function the sound in the room ?

A: The speaker is an economic flush-mount ceiling loudspeaker for for general purpose applications. This full range loudspeaker is suitable for both speech and music reproduction in shops, department stores, schools, offices, sports halls, hotels and restaurants