Designed to eliminate the extra step of finishing the screen with trim, the 220V ceiling mount projector screenfrom ceiling mount projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Do you think it could mount a Logitech webcam? (C920 to be exact)

A: The Smith-Victor Ceiling Mount with 5.0' Telescoping Extension states it includes a 3/8 stud, while the Logitech C920 HD Pro Webcam indicates it has a standard female 1/4 -20 tripod thread. The Novatron Adapter - 3/8 Female to 1/4-20 Male, B&H # NOA38.2520, would be the required adapter to connect the Logitech C920 HD Pro Webcam to the Smith-Victor Ceiling Mount.

Q: 2. Is this compatible with the PC155 pendant cap? Thank you.

A: The Hikvision CPM-S Ceiling Pole Mount (Short) BH #HICPMS is compatible with the Hikvision PC155 Pendant Cap (White) BH #HIPC155.

Q: 3. I understand the, Adjustable Height: column connector extends 5 - 22.7 But in what increments?

A: Starting with the flush mount (without extensions) it's 127.7mm.With the single extension it will be 402.7mm.Adding the adjustable extension you can increment it by 25mm per hole until fully extended to 577.7mm.

Q: 4. This mount comes with 2 attachments. One is obviously the scissor mount for use with a drop ceiling, but what is the other accessory for?

A: From the manufacturer. I checked into this and was told that there is a loop on the safety cable that goes over the scissor mount stud. The safety cable is then secured to the stud by the item on the left.

Q: 5. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.

Q: 6. This CM00G3 is advertised being for all BenQ Projectors ...I have an SP820,does this mean the CM00G3 would work with the SP820?

A: Yes, this will work with the SP820.

Q: 7. Can we use this to mount a camera? Are there any accessories recommended for that?

A: While the above item is not designed for use with cameras, you may purchase the Novatron Adapter - 3/8 Female to 1/4-20 Male, B&H # NOA38.2520, the Oben 3/8 -16 to 1/4 -20 Reducer Bushing, B&H # OB1039, and the Barska AF12544 Aluminum Ball Head, B&H # BABJTH, for your usage needs to connect a camera to this item.

Q: 8. I am looking for a solution that will allow me to point my projector straight down onto a table. Will this bracket allow this?

A: The Kupo Universal Projector Mount (BH # KUKD303112) will allow for flexible 360 degree and vertical orientation with laser or LED projectors.

Q: 9. Can you tell me the diameter of the pipe? I need to mount a benq projector to a a tripod and am hoping to use this?

A: BenQ does not offer this spec. Here's what we know:Material Steel/ Aluminum AlloyWeight 4.56lbs (2.07kg)Length 5.02 22.7 (each spaced .98 apart)Rotation Angle 360Tilt Angle +/- 25Load 33lbs (15kg)Screw Type M3, M4, M5, M6We do not recommend using this product other than as a ceiling mount.

Q: 10. What is the best way to get power to the digital display?

A: Via the display's included AC cable.