Designed to eliminate the extra step of finishing the screen with trim, the 120V ceiling mounted projector and screenfrom ceiling mounted projector and screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

164" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can this be used for 70 V systems?

A: The Atlas Sound AT100-RM Rack Mounted 100W Attenuator will work with a 70v signal and a 70v signal only. It should not be attempted to be used with 8Ω equipment.

Q: 2. how long is the power cable?

A: 5 ft

Q: 3. 29inches?

A: The dimensions of this attenuator are:Dimensions (HxWxD) 2.75 x 1.7 x 2.5 (6.985 x 4.445 x 6.35 cm)

Q: 4. Is this a typical light stand mount? Like, could I used this to mount some video lights to some exposed ceiling joists?

A: The ALZO Wall-Mounted Camera Support with Ball Head has a 1/4"-20 mount which many lights are able to mount on to. ALZO Digital lists the maximum load capacity as 6 lb but recommends using this setup with a payload up to 2 lb, so the light that is mounted would be recommended to be under this weight.

Q: 5. will this work on the 135i scanner?

A: Yes, the Plustek 35mm Mounted Slides Holder works with the Plustek OpticFilm 135i Film Scanner.

Q: 6. Each preview image displays a different item. Does the actual item for sale have the two additional holes allowing for a 90º pivot? Thanks

A: According to the Peerless-AV literature this mount does have the two holes for 90 degree pivot: https://docs.peerless-av.com/BOOK8.5X11IN-120-9142-1-4-1.PDF

Q: 7. Our goal is to place speakers around a room, easily, and run the cables back to something to have microphones used with them. Is this a possibility with this item? If so, what all do I need?

A: Typically this setup would require a mixer, an amplifier, cabling and microphones. Contact us via e-mail for specific recommendations: Audio@a href= http://BandH.com target= _blank BandH.com/a

Q: 8. Does this come with a filter pouch?

A: Yes it does come with a pouch.

Q: 9. Can I connect 2 of these speakers to a computer?

A: These speakers require a Supply Voltage of 24 V DC and would not be suitable for direct connection to a computer.

Q: 10. Are there 2 speakers with this purchase or only one?

A: The Bogen CSD2X2VRU Drop-In Ceiling Mounted Speaker with Back Can (Pair, 70V/25V, Bright White) includes two speakers.