This 46mm commercial filter coffee machinesis a solid ND filter with a filter factor of 16x that provides a 4-stop exposure reduction. Its 1.2 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.

1.2 Optical Density    ColorCore Technology    46mm Front Threads    Darkens Entire Image    Allows Reduced Shutter Speed    Allows Wider Aperture    Includes Plastic Case

The 1.2 neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.

Providing a 4-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily.

Filter does not affect coloration of the image and is ideal for use with other filters.

Front filter threads allow for use with other filters.

Plastic filter case for storage and transport.

Related Questions and Answers

Q: 1. Is the Yuneec H520E Remote ID compliant with the FAA in the United States?

A: Yes, Remote ID compliance was added to the YUNEEC H520E Commercial Hexacopter via a firmware update.

Q: 2. Is there any chemical in this that may cause an allergic reaction in some people?

A: The answer to your question is yes. People have alergic reactions to all sorts of things. Mold, pollen, dust, plastic, latex, I am sure that some people may be allergic to this type of glycol based smoke. It is however not very common. If you want more info on the safety of this chemical, you should search the internet for its MSDS (material safety data sheet). It's readily available from the Antari website and many others.

Q: 3. What's the difference between Green vs. Blue? Is the color precipitable in the haze itself?

A: The FLG-4 Fog Fluid in Green is meant to give the user a longer lasting fog while the Blue version is mainly for low lying fog. The color is not seen in the haze itself.

Q: 4. Hi,Would it be possible to power my 200 watts speaker using RANE MA3?

A: This amp is not powerful enough at 40 watts per channel to power a 200 watt speaker. The Lab.Gruppen LUCIA 240/1-70 Mono Amplifier for 70V Installations (1 x 240W), B&H # LAL240170US would be good for one speaker. If you have 2 speakers , then I would look at the QSC SPA Series ENERGY STAR 2-Channel Power Amplifier (200W/Channel), B&H # QSSPA2200.

Q: 5. What comes with it (carrying case, 2nd battery, propeller guards, etc.)?

A: The YUNEEC H520E Commercial Hexacopter will include the following: Yuneec H520E RTK Hexacopter ST16E Ground Station Controller 2x 4S-6200mAh LiPo Batteries Charger OFDM Module Clockwise A Rotors Counter-Clockwise B Rotors 16 GB MicroSD Card USB Cable Power Cable Yuneec Limited 1 Year Warranty

Q: 6. What is the largest size print that can be pressed all at once, without shifting the print?

A: The D&K SE-1406 has a Platen Size of 23 x 18.5" / 58.4 x 47 cm. So the that is the largest size print and or matte board that can fit.

Q: 7. can one person move this item

A: The unit weighs close to 75lbs. I would recommend that two people be present to move it. A single strong person could perhaps lift it momentarily if they have the upper body strength, but in general I would not advise to lift that weight alone.

Q: 8. This can be used in Europe too, or its made from USA voltage?

A: This mounting press is USA voltage only.

Q: 9. HI, Is it possible to power my 200 watts speaker using Rane MA3?

A: This amp is 40-watts per channel, so it would not power 200 watt speakers. I would suggest a 200 watt amp, such as the ART SLA-2 - 2-Channel Rackmount Power Amplifier (200W Per Channel at 8 Ohms), BH #ARSLA2.

Q: 10. Can I buy a replacement thermostat for the 210 press?

A: Here is the replacement thermostat for the 210M: https://bhpho.to/3wVPqNR