The 120V motorized ceiling mount for tvfrom motorized ceiling mount for tvenables you to upgrade an existing Advantage Electrol screen by adding ViewShare video conferencing features. It includes a new fabric, motor, and roller assembly. Also included is a Logitech C930e HD Webcam (integrated in the screen's slat bar) and a Jabra SPEAK 410 MS Speakerphone.

92" Diagonal / 16:9 Aspect Ratio    High Contrast Matte White Screen Surface    1.1 Gain / 100° Viewing Angle    For Screens with Type 1 Motor    Integrated Webcam and Speakerphone    Smooth Roll Technology

High Contrast Matte White is a fiberglass surface with a gray base for deeper reproductions of black, which improves contrast. It is for non-high-definition projection and environments with moderate ambient light. Cone: 100° Gain: 1.1

This retrofit is for screens that have the Type 1 Motor. The Type 1 Motor is identified by a 4-wire connector and has manual limit adjustments on the end of the motor

• The auto-focusing camera is integrated into the slat bar
• Plug-and-play connectivity
• Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
• H.264/SVC video compression
• Supports H.264 SVC 1080p for Microsoft Lync 2013, along with optimizations for call performance in single or multiparty HD video
• 90° field of view
• Up to 4X zoom in 1080p
• Rightlight 2 Technology for clear image in various lighting environments, even low light
• Optional light application for control of pan, tilt and zoom
• Carl Zeiss lens
• External privacy shutter
• Automatic low-light correction
• High-speed USB 2.0 certified (ready for USB 3.0)
• System requirements: Windows 7 or 8 / Mac OS X 10.7 or higher
• 2.4 GHz Intel Core 2 Duo processor
• 2GB of RAM
• Adequate hard drive space for recorded videos
• USB 2.0 port
• Compatible with UVC apps, and H/264 for Lync 2013. Optimized for Lync and Skype

• Connects via USB
• Requires 120 VAC power (AC adapter included)
• Microsoft certified
• Wideband hi-fi frequency response
• Includes digital signal processing, which digitally optimizes your voice and music while suppressing echoes
• Omnidirectional microphone and noise filter enhances call clarity by eliminating background noise
• Standard (E-STD) microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices
• Mute function directly on the device

• Standard Silent Drive System to keep your screen whisper quiet
• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen flat
• Standard black backing retains projected brightness
• Seamless screen surface

Related Questions and Answers

Q: 1. Does it articulate the 4" depth as recommended by Sonos?

A: It has steps that allow Atmos to play unimpeded.

Q: 2. would this work with theEpson PowerLite L735U 7000-Lumen WUXGA Education & Corporate Laser 3LCD Projector?

A: The BenQ CM00G3 Ceiling Mount for Most BenQ Projectors BH #BECM00G3 will work with the Epson PowerLite L735U 7000-Lumen WUXGA Education & Corporate Laser 3LCD Projector (Black) BH #EPL735U.

Q: 3. Will it work with the new Canon EOS RP?

A: Yes The CAME-TV Motorized Parallax Slider (23.6") B&H # CAS0160 MFR # S01-60 will work with The Canon EOS RP. The RP would us the C3 cable.

Q: 4. For the telescoping height range, are 41.7" and 61.4" the only two options, or can be set anywhere in between?

A: The telescoping height adjustable pole on the Mount-It! MI-509L Full Motion Ceiling Mount for 32 to 70" Displays can be set to many different height increments between 41.7" and 61.4".

Q: 5. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.

Q: 6. Does the N1 or N3 cable will work with Nikon D7500? Thank you.

A: the manufacturer does not list the D7500 but the closest camera to that model is the D7100 and that uses the N3 type cable

Q: 7. I'm looking to mount a 65" LG OLED above a fireplace with a pull down mount , anything I'm overlooking that might make this not work?

A: To be clear, this mount is for the Sonos Arc and connects to a standard TV mount. This is not a mount for the TV itself. With that said, this should work with any pull down mount if installed correctly.

Q: 8. Do I still Need the Sonos Arc wall mount to connect to this mount? Sonos says their wall mount let’s the Arc know it’s connected to the wall and will adjust sound accordingly

A: It does state that there is a magnetic sensor, which theoretically would sense any wall mount, though it is recommended to use the Sonos Arc mount. See be;low from product description: Automatic EQ Adjustment A magnetic sensor detects when the Arc is mounted and adjusts the EQ to temper bass resonance

Q: 9. How big around is the top supporting base?

A: Hi Danny, The diameter of the flange on this mount is 5 and 7/8 inches. Thank you for your interest in Cabletronix parts.

Q: 10. Is the weight of 3 lbs accurate? I'm asking because I have a motorized tv mount, and I want to make sure my TV, Sonos Arc, plus the mount don't exceed the weight limit. Thanks!

A: Yes. This product attaches to existing wall mount and is 3.1 lbs. https://www.bhphotovideo.com/c/product/1574477-REG/flexson_flxsartv1021_tv_mount_for_sonos.html/specs