The 220V diy recessed projector screenfrom diy recessed projector screenenables you to upgrade an existing Advantage Electrol screen by adding ViewShare video conferencing features. It includes a new fabric, motor, and roller assembly. It also comes with an integrated Logitech C930e HD Webcam installed in the slat bar, and a Jabra SPEAK 410 MS Speakerphone. The screen features tensioning to ensure the smoothest possible surface.

133" Diagonal / 16:9 Aspect Ratio    Pearlescent Screen Surface    1.5 Gain / 80° Viewing Angle    For Screens with Type 1 Motor    Integrated Webcam and Speakerphone    Tab-Tensioned Screen Surface    Smooth Roll Technology

Pearlescent offers a higher amount of reflectivity than unity-gain Da-Mat finish, and is designed for use in applications where moderate viewing angles are required. This surface is a good choice when producing video images with a lower output projector or where there is a high amount of ambient light present. Cone: 80° Gain: 1.5

This retrofit is for screens that have the Type 1 Motor. The Type 1 Motor is identified by a 4-wire connector and has manual limit adjustments on the end of the motor

• The auto-focusing camera is integrated into the slat bar
• Plug-and-play connectivity
• Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
• H.264/SVC video compression
• Supports H.264 SVC 1080p for Microsoft Lync 2013, along with optimizations for call performance in single or multiparty HD video
• 90° field of view
• Up to 4X zoom in 1080p
• Rightlight 2 Technology for clear image in various lighting environments, even low light
• Optional light application for control of pan, tilt and zoom
• Carl Zeiss lens
• External privacy shutter
• Automatic low-light correction
• High-speed USB 2.0 certified (ready for USB 3.0)
• System requirements: Windows 7 or 8 / Mac OS X 10.7 or higher
• 2.4 GHz Intel Core 2 Duo processor
• 2GB of RAM
• Adequate hard drive space for recorded videos
• USB 2.0 port
• Compatible with UVC apps, and H/264 for Lync 2013. Optimized for Lync and Skype

• Connects via USB
• Requires 120 VAC power (AC adapter included)
• Microsoft certified
• Wideband hi-fi frequency response
• Includes digital signal processing, which digitally optimizes your voice and music while suppressing echoes
• Omnidirectional microphone and noise filter enhances call clarity by eliminating background noise
• Standard (E-STD) microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices
• Mute function directly on the device

• Standard Silent Drive System to keep your screen whisper quiet
• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Standard black backing retains projected brightness
• Seamless screen surface

Related Questions and Answers

Q: 1. Is this printer really manufactured by XYZ printing? This doesn't look like one of their usual designs.

A: XYZ is not the manufacturer but they are providing tech support, warranty support and distribution. In other words, all the same responsibilities as if they made the printer themselves.

Q: 2. Is this compatible with revolution filters? Thanks.

A: The Kase DIY Magnetic Screw-In Adapter Ring Kit (82mm) is incompatible with Kase Revolution Magnetic Filters. This adapter ring kit converts conventional 82mm screw-in filters to the magnetic type.

Q: 3. It says this is good for group shots. How many in a group would this be recommended to accommodate in a group shot?

A: Larger modifiers like the Mega JS are considered for groups as they provide a greater area of soft even light. Used at the appropriate angle and distance and with a light source capable of providing adequate exposure, The Mega should be a good choice as a modifier for various size group photos.

Q: 4. Which Kase 77mm adapter ring do I need for the lens itself that works correctly with these DIY rings?

A: The Kase DIY Magnetic Screw-In Adapter Ring Kit (77mm) includes two rings. One ring is screwed on the lens and the other is screwed on the filter. You don't need to buy a ring separately to have this work with one filter. If you want to place a ring on a second filter so that you can easily switch between two filters quickly you can purchase extra rings for the filter here. https://bhpho.to/45FWGka Unfortunately, Kase does not make available just the lens ring available separately. The lens ring is only sold together with the filter ring.

Q: 5. Hi! Just wondering if this will work with continuous light? I have the Spriderlight TD6!

A: I use a Yongnuo 300 II LED light in it and it works great for my purposes. However the 300 isn't the brightest light so you may want a bigger light source depending on your uses.

Q: 6. how many pounds?

A: 2.0 lbs.

Q: 7. Can this printer use other brands of filament, or just XYZ?

A: This printer can use any brand of the following filament types: 1.75mm PLA, ABS, PETG, Carbon Fiber PLA, Metallic PLA, and more are supported by the CZ-300.

Q: 8. Hey BH!This camera with flash comes with the colored filters for flash?

A: Yup! Four filters. White, yellow, blue, and orange/red

Q: 9. The tube of the westscott softbox is too thick for my flash bracket mount. What bracket can i get that would fit this? Thanks.

A: Godox S2 is a good bracket. https://bhpho.to/34jdQ6K

Q: 10. is it ready to print in carbon fiber?

A: Yes, the XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer is compatible with 1.75mm carbon fiber PLA filament.