The 220V 80 in projector screenfrom 80 in projector screenenables you to upgrade an existing Advantage Electrol screen by adding ViewShare video conferencing features. It includes a new fabric, motor, and roller assembly. It also comes with an integrated Logitech C930e HD Webcam installed in the slat bar, and a Jabra SPEAK 410 MS Speakerphone. The screen features tensioning to ensure the smoothest possible surface.

94" Diagonal / 16:10 Aspect Ratio    High Contrast Da-Mat Screen Surface    0.8 Gain / 90° Viewing Angle    For Screens with Type 1 Motor    Integrated Webcam and Speakerphone    Tab-Tensioned Screen Surface    Smooth Roll Technology

High Contrast Da-Mat is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. This surface works best in environments with a high-output projector and controlled ambient light. Cone: 90° Gain: 0.8

This retrofit is for screens that have the Type 1 Motor. The Type 1 Motor is identified by a 4-wire connector and has manual limit adjustments on the end of the motor

• The auto-focusing camera is integrated into the slat bar
• Plug-and-play connectivity
• Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
• H.264/SVC video compression
• Supports H.264 SVC 1080p for Microsoft Lync 2013, along with optimizations for call performance in single or multiparty HD video
• 90° field of view
• Up to 4X zoom in 1080p
• Rightlight 2 Technology for clear image in various lighting environments, even low light
• Optional light application for control of pan, tilt and zoom
• Carl Zeiss lens
• External privacy shutter
• Automatic low-light correction
• High-speed USB 2.0 certified (ready for USB 3.0)
• System requirements: Windows 7 or 8 / Mac OS X 10.7 or higher
• 2.4 GHz Intel Core 2 Duo processor
• 2GB of RAM
• Adequate hard drive space for recorded videos
• USB 2.0 port
• Compatible with UVC apps, and H/264 for Lync 2013. Optimized for Lync and Skype

• Connects via USB
• Requires 120 VAC power (AC adapter included)
• Microsoft certified
• Wideband hi-fi frequency response
• Includes digital signal processing, which digitally optimizes your voice and music while suppressing echoes
• Omnidirectional microphone and noise filter enhances call clarity by eliminating background noise
• Standard (E-STD) microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices
• Mute function directly on the device

• Standard Silent Drive System to keep your screen whisper quiet
• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Standard black backing retains projected brightness
• Seamless screen surface

Related Questions and Answers

Q: 1. COMPATIBLE CAMERAS?

A: This radio sync transceiver will work with most cameras that have a standard hotshoe.It is not TTL so the flashes will be manual only.It comes as one unit so you need at least two, one for the camera and one for the off camera flash.

Q: 2. I bought the Impact PowerSync16-80 Transceiver because it's backward compatible, but it will not fire my Speedlite 430 EX or my Travelite 750's... I can see that it is triggering on the display, but nothing happens. Any advice?

A: The PowerSync 16-80 is backward compatible with the Impact PowerSync 16. The PowerSync 16-80 will only trigger PowerSync 16-80 and PowerSync 16 receivers. When using the PowerSync 16-80, which has 80 channels, with the PowerSync 16, which has only 16 channels, use the dip switch guide found inside the battery door of the PowerSync 16-80. The PowerSync 16-80 uses channels 65-80 to correspond to the 16 channels on the PowerSync 16. Additionally, make sure all groups are shut off on the PowerSync 16-80.

Q: 3. Can you adjust the output of different groups remotely or do you have to adjust each flash output at the flash in question?

A: Hey Zach - to the best of my knowledge, you can certainly assign groups - seems like there were like four pairs across a,b,c,d - maybe. I don't know the math on how many pairs, groups, etc. But, I have truly enjoyed the three that I have - all the best - I hope this helps, all in all great value, comes in a protective pouch, and is pretty straight forward.

Q: 4. Does this work with the Nikon d7200 and d500 and if so do I need to buy extra cords?

A: This transceiver can work with Nikon DSLRs such as the D7200 and D500 using the hot shoe.

Q: 5. Can I use this transceiver with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: If you had 2 of these transceivers you could use it with the Elinchrom D-Lite 400W/s RX 4 Flash Head. The Impact PowerSync 16-80 will not fire the internal receiver on the Elinchrom. You need to have 1 PowerSync 16-80 attached to the 3.5mm sync port of the Elinchrome and 1 PowewerSync 16-80 on the camera.

Q: 6. Is this camera compatible with windows 10?

A: Yes, this camera will have no issue with Windows 10.

Q: 7. I have a PowerSync10 transmitter. Is this compatible?

A: Unfortunately, this unit is not compatible with the Impact PowerSync 10 transmitter.

Q: 8. What is the max sync speed when used with a Sony a7x/II series camera?

A: Most cameras can safely sync at 125, but the exact for each camera will be listed in your manual.

Q: 9. Do you have to buy a separate part for this to be compatible with a canon camera? Like some type of mount?

A: The Lensbaby Edge 80 Optic attaches to other Lensbaby lenses, and Lensbaby produces lenses with Canon EF mount. An example of a lens you could mount the optic on is the Lensbaby Composer: http://bhpho.to/1oBqzUA

Q: 10. If I have a Sony A65 with a Sony/Minolta hotshoe can I use a HD-N3 hotshoe adapter on the camera then attach the Power Sync 16-80 onto the adapter for it to work? I use this setup for a Yongnuo YN-560 II manual flash.

A: If the HD-N3 converts a Sony/Minolta hot shoe to a standard hot shoe, it is assumed that this will allow the Powersync 16-80 to work on your Sony A65. However, there are no tests which confirm that these products will work together.