The 120V low profile recessed projector screenfrom low profile recessed projector screenenables you to upgrade an existing Advantage Electrol screen by adding ViewShare video conferencing features. It includes a new fabric, motor, and roller assembly. It also comes with an integrated Logitech C930e HD Webcam installed in the slat bar, and a Jabra SPEAK 410 MS Speakerphone. The screen features tensioning to ensure the smoothest possible surface.

106" Diagonal / 16:9 Aspect Ratio    Da-Mat Screen Surface    1.0 Gain / 120° Viewing Angle    For Screens with Type 2 Motor    Integrated Webcam and Speakerphone    Tab-Tensioned Screen Surface    Smooth Roll Technology

Da-Mat is a unity gain vinyl surface with a smoother surface than the Matte White finish. It features a white surface for good color reproduction for environments with controllable ambient light. Cone: 120° Gain: 1.0

This retrofit is for the Type 2 Motor. The Type 2 Motor is identified by a 3-wire connector, does not have manual limit adjustments, and features an RJ-22 cable

• The auto-focusing camera is integrated into the slat bar
• Plug-and-play connectivity
• Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
• H.264/SVC video compression
• Supports H.264 SVC 1080p for Microsoft Lync 2013, along with optimizations for call performance in single or multiparty HD video
• 90° field of view
• Up to 4X zoom in 1080p
• Rightlight 2 Technology for clear image in various lighting environments, even low light
• Optional light application for control of pan, tilt and zoom
• Carl Zeiss lens
• External privacy shutter
• Automatic low-light correction
• High-speed USB 2.0 certified (ready for USB 3.0)
• System requirements: Windows 7 or 8 / Mac OS X 10.7 or higher
• 2.4 GHz Intel Core 2 Duo processor
• 2GB of RAM
• Adequate hard drive space for recorded videos
• USB 2.0 port
• Compatible with UVC apps, and H/264 for Lync 2013. Optimized for Lync and Skype

• Connects via USB
• Requires 120 VAC power (AC adapter included)
• Microsoft certified
• Wideband hi-fi frequency response
• Includes digital signal processing, which digitally optimizes your voice and music while suppressing echoes
• Omnidirectional microphone and noise filter enhances call clarity by eliminating background noise
• Standard (E-STD) microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices
• Mute function directly on the device

• Standard Silent Drive System to keep your screen whisper quiet
• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Standard black backing retains projected brightness
• Seamless screen surface

Related Questions and Answers

Q: 1. Does this model have a tension control on the ball? It's not mentioned in the specs but from the pictures it looks like it does.

A: Yes, Leofoto LH-36 Low Profile Ball Head small knob above the Panning knob controls speed tension on the ballhead. The large knoc locked in/out the ballhead.

Q: 2. Will this particular product fit on the side of a Sony FX 30? Looking for vertical video solutions.

A: The SmallRig Low-Profile NATO Rail (2") could mount to either of the FX30's side 1/4"-20 threads, but it needs two threads to provided a sold mounting point, so it would not work well mounting diretly to either side of the camera. If you happen to have a cage on your FX30, then the SmallRig Low-Profile NATO Rail (2") would likely work better as it would have more threads to mount to.

Q: 3. Any idea what the max load is for this nato rail? I have it on top of my camera cage and I use it with a Nato top handle.

A: Max payload is not listed by the manufacture for this product, but if you tighten the screws provided with the nato rail to the cage, holding 10+ pounds should not be an issue.

Q: 4. Can you remove the center bolt and make this a female tie-down? My head already has a bolt.

A: Yes, you can remove the bolt in the middle of the Matthews Low-Profile Mitchell Tie-Down. You will still need to use the nut to fasten the bolt securely.

Q: 5. will sunwayfoto L Bracket fit Pnl-D750R-L on Leofoto LH-36 ball head ?

A: Yes, that L bracket will fit on this ballhead.

Q: 6. Does it come with a plate or I should purchase this sparately?

A: It does not come with the plate. It would need to be purchased separately.

Q: 7. What is the diameter of the tie-down?

A: The Matthews Low-Profile Mitchell Tie-Down has a diameter of 3.5 inches.

Q: 8. Would this fit on top of the RED Komodo/Komodo-X?

A: Yes, the top of the RED DIGITAL CINEMA KOMODO-X 6K Digital Cinema Camera can fit the SmallRig Low-Profile NATO Rail (3.5").

Q: 9. Are accessories releasable from either end?

A: Yes, you can release accessories from either end of the SmallRig Low-Profile NATO Rail (2.8").

Q: 10. What is the height?

A: As per Leofoto, the LH-35 Low Profile Ball Head measues 3.3 inches tall.