The wireless xlr transmitter and receiver for microphoneis a wireless bodypack transmitter compatible with the SR420 wireless receiver. With a lightweight design, it is comfortable for performers and presenters to wear, while providing up to 8 hours of continuous use on a AA battery.

The channel-selection buttons allow you to quickly set the transmitter to operate on one of eight different carrier frequencies to match it with the receiver.

Other features include an easily accessible 3-position On/Off switch that can be used to mute the transmitter. There is an adjustable gain control to adjust the microphone level.

The 3-pin mini-XLR input jack allows you to plug the lavalier, headset, or instrument microphone of your choice or a guitar/bass with the included guitar cable.

For SR420 Wireless Receiver    Use with Lav/Headset Mic or Instrument    3-Pin Mini-XLR Connector    8 Hours with AA Battery

You can connect the following AKG microphones to the audio input jacks of the PT420:

• Lavalier/headset mics: CK77 WR, CK99 L, C417 L, C520 L, C555 L, C544 L, HC577 L
• Instrument mics: C516 ML, C518 ML, C519 ML, C411 L
• MKG L guitar cable: for an electric guitar, electric bass guitar, or a keytar

• Up to eight hours with a single AA battery
• Low-battery indicator
• Quiet On/Off/Mute switch
• Easy operation
• Adjustable gain control
• Integrated charging contacts for use with the CU400 charging unit (available separately) when operating on HR 6 AA (NiHM) rechargeable battery (available separately)

Related Questions and Answers

Q: 1. Does this device transmit & receive on the same radio frequencies as Wireless Access Points (2.4GHz and/or 5.0GHz? Thus causing channel contention/interference?

A: This device operates on 4.9 5.9 GHz (includes non-DFS and DFS frequency bands). It should not interfere with most Wi-Fi networks or devices.

Q: 2. I am trying to show my design program on my TV. I have about a 8' HDMI wire to do so but it is very unprofessional and off looking. Will this solve that problem honestly because they told me at office depot it would with chrome cast but it didn't. It only supported certain apps, but i need something EXACTLY like the HDMI cord that plugs into my computer and into the TV but wireless. PLEASE HELP I AM DESPRETE?

A: Thia would be an ideal device for use with your proposed application.

Q: 3. Could you please check the dimensions? They don't seem to be correct, given the box dimensions. They look to be the right size to fit something like a single Sennheiser G3 bodypack transmitter, is that what it's designed for?

A: Yes they will fir Sennheiser, Sony and numerous other body packs. It is not made for a specific product. These are the measurements for the Interior: 12.00 x 4.00 x 7.00 .

Q: 4. i've got an hdmi splitter to connect 2 TVs from the same TV source provided by an internet box from sfr . for one of the 2 tv which is distant of 15m from the splitter would like use Wireless wifi from one splitter output rather than my current HDMI cable ; is the iogear device can meet my need ?

A: My guess is that it might work fine with SFR but my test was with a Comcast/Xfinity internet box. With the Comcast box, it would not work from a distance of 35-40 feet (close to your 15m length). Very poor signal quality.

Q: 5. Does this support full 1080 resolution 3D?

A: The IOGEAR Wireless HDMI Transmitter and Receiver Kit does support 1080P HD as well as 3D content.

Q: 6. Can i take output from audio mixture to go to camera input

A: No, the CHAUVET DJ Wireless D-Fi XLR Transmitter will not facilitate the transmission of an audio signal from a mixer output. This device is designed to be used with XLR connections in a DMX lighting protocol and is not compatible for use with audio signals.

Q: 7. Can two of these systems be used at the same time in the same room? I want to capture video from a remote device to a professional mixer and also send video out of the same mixer to an HDMI splitter.

A: IOGEAR says: I would recommend using the GWHD11 and GWHDKIT11 for this setup. . To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 8. Can this device be used from a video camera to a computer with the transmitter on the camera and the receiver through an HDMI input on the computer?

A: I had a lot of trouble with this unit... but I was throwing a video image over wifi to a projector. B&H exchanged it for this product, which is wonderful: a href= http://www.bhphotovideo.com/c/search?Ntt=ACMWTV2KIT01&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= target= _blank http://www.bhphotovideo.com/c/search?Ntt=ACMWTV2KIT01&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=/a I highly rec'd it

Q: 9. Can the transmitter be powered through the HDMI via a Thunderbolt to HDMI adaptor?

A: No you need a USB A connection for the power.

Q: 10. I'm currently using a D-Fi Tx to control a few lamps on stand. Can I use multiple Tx on the same channel to broaden the coverage

A: In a system you will only use one CHAUVET DJ Wireless D-Fi XLR Transmitter. The other fixtures will need CHAUVET DJ Wireless D-Fi XLR Receivers.