Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. What are the exact gobos included?

A: Please find an image of the 10 holiday gobos included on the manufacturer's website https://www.chauvetdj.com/products/gobo-shot/

Q: 2. Do i need to buy kupo grip head seperatly?

A: You will need a grip head to attach it to a stand https://bhpho.to/2IVmajI.

Q: 3. Does the maximum load of 11 pounds include the counterweight? Or is it 11 pounds on the extended end, and then the counter weight is in addition to that?

A: I've personally used it to arm out a Kino Diva 401 with a 15lb sandbag on the back. As long as it's rigged correctly at the knuckle, I'd say the 11lb weight limit is an engineers rating. That being said, a weak point is definitely swivel counterweight hook on the back. I've not taken it apart to see how it's attached, but it can't be very secure as it swivels to prevent weights from falling off. However the real weak point is the operator. Putting 1lb out at full extension can still severely hurt someone if it's not rigged correctly, regardless of the brand of boom. Always use common sense over manufacturers recommendations.

Q: 4. Will this fit on the Kupo c stand riser kit? Wanted to replace the 40" arm with this one since it extends to twice the length for overhead shots

A: Yes, this Kupo Steel Baby Boom can fit a Kupo C-Stand Riser equipped with a 2.5" grip head.

Q: 5. What are the dimensions of the #100 sandbag?

A: The dimensions of this sandbag are 14 inches wide by 34 long.

Q: 6. What size tubes can this clamp hold?

A: The slotted disc accepts round tubes of 10/13/16mm diameters.

Q: 7. For someone who owns the boom.. can you measure the maximum extension? Ive seen some reference to 83 inches and some to 95 inches

A: Length 46.46 to 85.4"

Q: 8. Are these filters optimized just for film?

A: This are filters that are specifically for adding or subtracting color from a scene.

Q: 9. This is shown under accessories for a Mathews Medium High Roller stand, which has a 4 1/2" grip head, but the overview for the Kupo boom arm says it will fit "such as the Kupo 2 1/2" grip heads. Will it fit a 4 1/2" grip head?

A: Yes.

Q: 10. Could the Boom Arm hold the Amaran 300c RGB LED Monolight with an Aputure Lantern 90 (3') attached to it?

A: No, I would not recommend using the amaran 300c RGB LED Monolight (Gray), BH #AM300C and Aputure Lantern 90 (3'), BH #APAMOLANTERN on the Kupo Steel Baby Boom, BH #KUKG601612. The load capacity of the Baby Boom is 11lbs.