Sung Shim Used Appliance

Product Code: eq28225
Availability: In Stock

$89.97 $139.45

Qty

11 reviews Write a review

Description
Reviews (11)

The CineMilled Delrin Shim, 1" in width, allows you to mount 30mm accessories onto the 25mm handlebar tubes of the Ronin-M or Ronin-MX, the various MoVI stabilizers, and the CineMilled PRO Ring stabilizer. It has a flange design that lets you simply push the shim onto the place you want it, and it's precision machined from Delrin so it does not scratch or gauge carbon fiber tubes once tightened.

Mount 30mm Accessories onto 25mm Tubes

Parameters
Width	1" (2.5 cm)
Material	Precision machined from Delrin
Packaging Info
Package Weight	0.025 lb
Box Dimensions (LxWxH)	2.6 x 1.15 x 1.1"

Related Questions and Answers

Q: 1. This power supply is In the related products for yongnuo YN360. It says it's compatible but it is a 12v 5A power supply. On my YN360 it's written 8v 5A. I'm confused...

A: This power supply is rated for up to 12v and has been tested and approved for the YN360.

Q: 2. Work with yongnuo 300 II?

A: Sorry, no. This power is 12VAC while the light is 8VAC. The manufacturer has not provided any substitute at this time. I suggest looking on line for a AC power adapter for this.

Q: 3. How many QuadHead2Go devices do I need to connect 8 monitors to a single input? 2 or 3?

A: To connect 8 monitors using the Matrox QuadHead2Go Multi-Monitor Controller Appliance, you would need 2 units, but you would also need 2 DisplayPort outputs from your source in order to connect to 8 monitors. Matrox recommends using a Luma Series graphics card such as the Matrox Luma Series LUMA A380 Graphics Card, BH #MALUMAA380 to connect multiple appliances.

Q: 4. Will it work with YN 600 and YN 900 lights?

A: No... It's compatible with YN-300III/216/1410/300AIR/160III/168.

Q: 5. How many shims in a set? What are the thicknesses of the shims?

A: There are 8pcs shims in the DZOFilm Shim Set for Koop Rear Filters And the thickness is, Koop shims set (0.5mm*1，0.3mm*1，0.1mm*3，0.05mm*1，0.03mm*1，0.02mm*1）

Q: 6. Hi, Is this AC Power Adapter is compatible to the following Adapter listed? AC Adapter 5V-12V 12V 1.5A, 5.5/2.1mm, US 2-Pin Plug Thanks

A: This Powers Select Yongnuo LED Lights. We are not aware of its capabilities beyond that.

Q: 7. Are there 2 separate outputs on this encoder?

A: This encoder has both an SDI and HDMI output.

Q: 8. On the circular connector, is the inner diameter 2.1mm or 2.5mm? Is the outer diameter 5.5mm?

A: On the circular connector, the inner diameter is 2.5mm. The outer diameter 5.5mm.

Q: 9. Is the circular connector inner diameter 2.1mm or 2.5mm? Is the outer diameter of it 5.5mm?

A: After speaking with the distributor, the link power adapter inner diameter is 2.1mm and the outer diameter is 5.5mm.

Q: 10. Does this come with the rubber seal cover? (SCNAC-MPX)

A: Yes, it comes with a cover, https://bit.ly/3gdwhS4

Carlos	28/09/2024
[1" (2.5 cm)] This is a must for the light. I just can't see using the battery adaptor for a light with this kind of power. Togally worth it! 5

Richard	18/08/2024
[1" (2.5 cm)] I like that it has long enough cords that helps to isolate it from other sensitive electronic equipment and reduce/eliminate RFI. 5

Jon	14/08/2024
[0.025 lb] Bought two for my set of Yongnuo 300II lights. They do the trick! 5

Chip	23/06/2024
[1" (2.5 cm)] We have used these units on many different projects and have always had great success. Easy to use and reliable. 5

Peter	23/05/2024
[1" (2.5 cm)] I tested adapter with my YN760 LED light, it worked perfectly. 5

Harry	17/05/2024
[1" (2.5 cm)] Save your batteries and purchase this adapter for the Yn-216 Led light. 5

Isaac	09/05/2024
[0.025 lb] Provides a tight, securely locked connection with the female powerCon connecter. I use these to power network equipment installed in a Pelican case. Neutrik has CAD dxf and pdf drawings on their site if you need to drill holes in a surface for installation. I used their drawings to make a 3D printed stencil/jig for this purpose. For the screw holes, I use a 1/8 drill bit for machine screws w/ nuts, but go smaller if using a pointed/self-tapping screw. For the main entrance hole, I start with a 1/8 bit for a pilot hole, widen it with a 1/2 bit, then finally bore it all the way out with a 22mm step bit which makes a perfectly sized hole for this connector. For screws, M3 countersink (90deg) are an exact flush fit in the connector housing. I use black oxide screws to match the connector. The backside conductor tabs snap right into female quick connect terminals. I use the heat-shrink solder terminals and they stay on pretty well. If you need it to be really secure, consider soldering the terminals onto the tabs , but be careful not to melt the plastic! 5

Clark	01/05/2024
[0.025 lb] Works well with Yongnuo YN308. No issues so far. 5

Wilson	26/04/2024
[1" (2.5 cm)] It works. Buy it. 5

Paul Ruggieri	05/04/2024
[1" (2.5 cm)] I am using the 12v, 5A Fujiya AC adapter with my Luxli Cello light. I am so glad I have it and don't need to worry about batteries when I use the light on a stand. 5