Whether shooting with a long telephoto, in low-light conditions, or moving too fast to set up a tripod, the peak design monopodfrom peak design monopodis a versatile shooting companion.

This support reaches a height of 62.8", closes down to 20.7", and supports 35.3 lb. Lightweight at just 1.37 lb, you'll barely know you're carrying it. Opening and closing the 4 sections is quick and easy with the flip lever lock design, and a pivoting rubber foot prevents unwanted slipping.

The closed foam grip gives you a secure hold on the monopod and also insulates your hands from the aluminum on cold days. The mounting plate features a reversible 1/4"-20 and 3/8"-16 threaded mount for mounting a head or attaching directly to a camera.

Load Capacity: 35.3 lb    Maximum Height: 62.8"    Closed Length: 20.7"    Sections: 4    Weight: 1.37 lb    Reversible 1/4"-20 and 3/8"-16 Mount    Closed-Foam Grip    Fast & Easy Flip Lever Lock Design    Rubber Foot Avoids Fatigue & Slippage

Related Questions and Answers

Q: 1. Is this lens kit bundled with the Capture Clip V2 or V3?

A: The Peak Design Sony E/FE CaptureLENS comes with the V2 clip. It is compatible with the V3 clip as well.

Q: 2. What if you happen to be carrying a few extra pounds of body fat?

A: It should not be an issue.

Q: 3. is the body of this unit made of metal? I have the Gowing equivalent of the Peak, and the body is plastic and there are reports of failure with dropping of an expensive lens. I hesitate to use my unit.

A: The plate that slips into the device that clamps onto a belt or strap is made of metal. The flat belt gizmo is also metal so you have a secure metal to metal connection. The red protusion on the flat plate ejects the lens holding body when pushed in but also pulls out and rotates to lock the protusion from being accidently depressed and releasing the lens holder. The black wheel clamps down and secures the lens holder in place even further. The body itself to which the lenses attach is of plastic which WOULD be of concern if the slideing base that locks to the belt holder were of plastic but it's not. Metal to metal connection. I use it confidently even with both a 70-200 and 24-70 attached simultaneously. Only time it failed me is when I didn't completely rotate the 70-200 to its lock position. Fell 30 to concrete on the lens hood but did't do any evident or lasting damage.

Q: 4. Do they have one for Sony Alpha lenses? Can you use an adapter on it safely?

A: Only Sony E Mount Lenses at this time

Q: 5. Does this work with the new capture?

A: Sure will!

Q: 6. Does this come with the clip to attach to your belt/pack?

A: Yes, the clip is included.

Q: 7. Does it have a divider (membrane) in the middle, so it can protect the back of the lens from dust, when only one lens is mounted?

A: Yes,it has and I use it a lot of times for fast switching between lenses instead of taking it out in the bag during location shoot.Hope this helps.

Q: 8. I see in the last photo that it can rotate the lens, but my son has bouht it and it can not rotate. I want it can rotate, there are 2 models ?

A: Pull it out, then you can rotate it. I had the same problem for a while. So, if you have it on your belt, pull the lenses and their holder away from your belt and then you will be able to rotate the lenses and their holder. It is such a nice tight fit that it is easy to miss.

Q: 9. Will this work with a panasonic micro four thirds lens

A: No, this is for a Canon EF mount lens.

Q: 10. How do you attach your tripod with this on

A: When using a tripod you will have to remove it so you can attach the quick release plate