Save desk space and position your monitor just how you like it with the articulating dual arm computer monitor desk mountfrom Mount-It!. Compatible with VESA 75 x 75 and 100 x 100mm standards, the mount will support any flat screen display between 13 and 24" and no heavier than 19.8 lb. Its adjustable settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. Integrated cable management keeps your cables untangled and out of the way. No drilling is required; the mount attaches either onto your work surface with a secure dual c-clamp mechanism, or through your desk with the included grommet. All hardware needed for installation is included, as are setup instructions.

Mount 1 Monitor Above Your Desk    Fits Flat-Screen Monitors from 13 to 24"    Supports Monitors up to 19.8 lb    VESA 75 x 75, 100 x 100mm Compatible    Arm Rotates 360° Around Pole    Monitor Tilts -20 ~ 90°    Rotate Monitor Orientation 360°    Height is Adjustable Along 11.9" Pole    Attaches via Dual C-Clamp or Grommet    Cable Management Keeps Cables Hidden

• The arm rotates 360° around the pole to allow others to view presentations and other media from any direction.
• Adjust the height of your monitor by sliding the arm up and down the 11.9" pole.
• The joint between the two parts of the arm can swivel 360°.
• The mount head that connects the monitor to the arm can swivel 345° side to side.
• Customize your viewing angle by tilting the monitor up 90° and down 20°.
• The VESA mount that holds your monitor can rotate 360° to switch easily from Portrait to Landscape orientation.

Related Questions and Answers

Q: 1. What is the distance between the central joint to one of the ends?

A: Wei, it is roughly 3.5 inches on both sides.

Q: 2. Do both monitors need to be the same size and weight?

A: The Mount-It! MI-2762 Dual-Monitor Desk Mount BH #MOMI2762 will support two 13 to 32" displays. They can be different sizes on each.

Q: 3. Will this hold my 32 inch curve monitor?

A: MI-2762 is compatible with 75mm x 75mm and 100mm x 100mm VESA patterns and can hold up to 17.6 lbs per monitor arm

Q: 4. Can this be mounted by screwing it into the desktop? (Actually, it is a kitchen countertop with a back lip - so I cannot use a clamp.) Thank you!

A: It can not be screwed in. It is a table top clamp.

Q: 5. It says it supports up to 22LB is that per arm or all together?

A: The aluminum mount will fit most flat-panel monitors no heavier than 22.0 lb and up to 27 in size 22.0 lbs per monitor

Q: 6. What is the length/height from the table to the middle of the VESA mount? Is that what the "max arm extension length" covers in the specs?

A: Please contact the manufacturer directly for this unpublished specification: Mount-It!: Tel: (855) 925-5668

Q: 7. Are the arms made out of plastic?

A: The extensions arms of the Mount-It! Dual Monitor Desk Mount with Mechanical Springs BH #MOMI2672 are made from metal.

Q: 8. How close can you get it to the wall? Specifically how much distance is there between the last joint and the mounting bracket?

A: Using the Ergotron LX Desk Mount Monitor Arm (White), you could potentially mount a monitor about 3-4" away from a wall.

Q: 9. Will this work with two ASUS VE247H 23.6 Full HD 1920x1080 2ms HDMI DVI VGA Back-lit LED Monitors? I've never mounted a monitor before, and I see there is a plate, how do I know what it will fit?

A: Not all monitors are mountable . The ones that are have a clear noticeable 4 holes on the back of the monitor which are standard for any mount. The mount is screwed onto the back of the monitor via these 4 holes. Non-mountable monitors have a clean back with no holes and need to be used with a stand. This particular mount will attach to any mountable monitor. Your investigation should be whether or not these Asus monitors are indeed mountable . Hope this helps.

Q: 10. What's load capacity per arm?

A: The Mount-It! Dual Monitor Desk Mount with Mechanical Springs BH #MOMI2672 has a weight capacity of 17.6 lbs. per arm