For professional video applications, the head mounted waterproof video camerais based off a 100mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 7 steps, with the 0 setting providing nearly-frictionless movement. A 13-step adjustable counterbalance can compensate for cameras weighing up to 39 pounds. The BCH-20 is controlled with dual rosette-mounted pan handles. Both pan handles easily extend for greater leverage when using heavier cameras. Extra camera-mount screws are kept in 1/4"-20 and 3/8"-16 tapped holes on the sides of the head. When vacated, these holes can also be used as accessory mounting points. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Payload: 39.7 lb / 18 kg    100mm Half Ball    Stepped Counterbalance    0 to 7 Grades of Tilt & Pan Drag    Sliding Balance Plate    L/R Pan Handle Rosettes    1/4"-20 and 3/8"-16 Accessory Sockets    Illuminated Bubble Level

7 levels of friction control for panning and tilting, with 0 position for near-frictionless operation

13 levels of counterbalance adjustment

Dual bubble levels: Illuminated base bubble level and second top bubble level

Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance

Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform

Dual telescoping handles

Extra 1/4" and 1/8" screws stored in the integrated threads

Integrated 100mm ball mount

Separate pan and tilt-lock knobs

Quick-release plate included

Related Questions and Answers

Q: 1. Will this hold a Nikon D780 and the 24-120 kit lens?

A: OverBoard Waterproof SLR Camera Bag will hold a Nikon D780 with Nikon AF-S NIKKOR 24-120mm f/4G ED VR Lens.

Q: 2. Is the mounting depth adjustable?

A: The ER-SS1U comes with optional adjustable four post mounting ears which will adjust between 17.5 to 20.

Q: 3. Is this bag big enough to hold a Canon 5Dmk3 with a Canon 100-400 ii attached?

A: Hi, Ann, the bag is big enough for your lens and camera. I actually put a sponge at the bottom of the bag and I have cut a hole in the second sponge layer to hold my lens.Thanks, Shane

Q: 4. Is this a full fluid head or friction?

A: Yes, the Benro BV10H 100mm Video Head is a full, fluid video head.

Q: 5. Will this hold a Nikon D5500 with an AF S Nikkor 18-300 lens?

A: Yes, this should be able to hold a D5500 with 18-300mm lens.

Q: 6. Is this bag large enough to hold my Nikon D600 with a Nikon AF-S 28-300 lens attached ?

A: Yes, the OverBoard Waterproof SLR Camera Bag will fit a Nikon D600 and attached 28-300mm lens.

Q: 7. What is the depth of the shelf?

A: The depth of the shelf is 15.75". Actual dimensions of the shelf are 19 (width) x 15.75 (depth) x 1.75" (height). The shelf can slide out from a rack like a drawer and then be pushed back flush into the rack. The sliding track allows the entire shelf to pull out so it extends up to 13.8" from the rack.

Q: 8. Will Pentax KS2 fit in bag with 18-200mm lens attached?

A: Yes, this bag can accommodate a Pentax KS-2 with an 18-200mm lens attached.

Q: 9. Is there any padding inside for the camera?

A: This has no padding

Q: 10. Will this fit Sony A7III with Sony FE 100 - 400mm GM lens?

A: The OverBoard Waterproof SLR Camera Bag is too small to hold that camera and lens.