This samsung microwave plate 14 inchfrom samsung microwave plate 14 inchfeatures an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting.

The XPRO Magnesium Ball Head with 200PL-14 Quick Release Plate has a load capacity of 33.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening this XPRO Magnesium Ball Head's primary locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. An additional knob opposite the secondary locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.

Load Capacity: 33.1 lb    Magnesium-Alloy Construction    Up to 90° Portrait Angle Tilt    Independent 360° Rotation with Lock    Ball-and-Socket Tension Control    Two Bubble Levels    RC2 Quick Release Cam Lock    200PL-14 Quick Release Plate    1/4"-20 Mount, Non-Slip Surface

• 33.1 lb load capacity
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Integrated RC2 quick release cam lock
• Primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob allows head to rotate 360°
• Dedicated tension control knob for the ball-and-socket joint's movements
• One bubble level for landscape orientations and one bubble level for portrait orientations
• Durable, magnesium-alloy construction

• Compatible with Manfrotto RC2 quick release cam lock
• Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
• 1/4"-20 mount
• Durable, aluminum-alloy construction

Related Questions and Answers

Q: 1. Will this 324RC2 Joystick Head attach to a Manfrotto MT190X3 Aluminum Tripod? Thanks.

A: Sonja H, These products have always fit together for me and I have about seven heads and three tripods sitting in the closet, all Manfrotto! Note that there are compatible Manfrotto plates that fit on the top of the head that will hold your camera a bit more steadily if the one that comes with the head doesn't do the job. (This is largely a matter of the weight of the camera and lens together.) Enjoy your new purchases! Adrian

Q: 2. It works in Sachtler Cine 30HD?

A: After consulting with B&H Pro Video department it is very doubtful that the Losmandy will work on the Sachtler head

Q: 3. Will this work with a leupold tripod

A: Not sure...but the entire piece is a ballhead so it should work fine.

Q: 4. I have a Vanguard Auctus Plus 283CT tripod, will the Pistol grip work?

A: Yes, the Manfrotto 322RC2 Ball Head with 200PL-14 Quick Release Plate and 322RA Quick Release Adapter (B&H# MA322RC2) will attach to the Vanguard Auctus Plus 283CT Carbon Fiber Tripod (B&H# VAAP283CT).

Q: 5. I use my Canon 80D for videos once in a while. Will this work as a video pan?

A: No, this would not be good for video. You are much better off getting a video head or you can get a hybrid head for both. Click the link below to view; https://www.bhphotovideo.com/c/product/760106-REG/Manfrotto_MH055M8_Q5_MH055M8_Q5_Photo_Movie_Tripod_Head.html?sts=pi&pim=Y

Q: 6. Hi, I will use it with my GH5 to shoot videos but only in my hard trips (traveling). In your opinion is it good for video or do I have to look for another head? I need a very light head. THANKS

A: It is a fantastic head and one I have used for many years, starting with earlier designs, BUT it is not the best for video work. I would suggest a more dedicated video head that offers better panning.

Q: 7. How does this motion detector connect to a security system?

A: The sensor will connect to an NVR or DVR's alarm input and can trigger motion detection then someone walks in between two units and breaks the beam.

Q: 8. Will this work with Manfrotto tripod?

A: Yes, the SmallRig VCT-14 Quick Release Tripod Plate can be mounted to Manfrotto tripods.

Q: 9. I am wondering if the Kirk L bracket:http://www.bhphotovideo.com/c/product/747362-REG/Kirk_BL_D7000_BL_D7000_L_Bracket_for_Nikon.htmlWill work with the ball head? If not what options are there available

A: No. You would not be able to connect an Arca-Swiss type plate to your Manfrotto Quick Release. You will be able to use this Manfrotto L bracket instead:Manfrotto Q2 L BracketB&H # MAQ2LB ? Mfr # MS050M4-Q2This product will fit any tripod head that uses a 200PL plate. This includes the Manfrotto 324RC2

Q: 10. Does this grip enable the camera to be in landscape orientation and rotate up by 90 degrees?

A: No, the Manfrotto 324RC2 Ball Head with 200PL-14 Quick Release Plate does not tilt up 90 degrees in a landscape position.