The fold down laundry room organizer rod systemfrom fold down laundry room organizer rod systemreflects text from the display screen onto a beamsplitter mirror positioned in front of the lens. With help of isopropyl alcohol and a soft cloth (not included), you can easily clean the beamsplitter glass. This fold & go system can connect to SDI, HDMI, VGA, component, and NTSC/PAL composite video sources. The prompter monitor is 1000 nits bright. This system can be used with any ENG or mini camera. With the additional 2" riser plate, you can use the Telescript Fold & Go system with smaller cameras as well.

Built-in image reverse function

Professional monitor with 1000 nits brightness

Maximum viewing distance of 35'

SDI, HDMI, VGA, component, NTSC/PAL composite video, loop inputs

QuickMount system for simple on and off

12V battery operable

Weighs 13.5 lb

Related Questions and Answers

Q: 1. Is this a good shoulder rig for Canon XF305 or XF705 or is there something else you recommend?

A: Yes, great starting rig for any DSLR Cameras and Camcorders being built up.

Q: 2. I dont see the rod spacing listed. i hope i am not just overlooking it. thanks. what is the rod spacing?

A: 60mm

Q: 3. Is there a reason this adapter plate wont fit the Tilta dtap cable for C200 I got from B&H? The dtap cable fits in to the battery but not this plate unfortunately

A: Sometimes, although it is typically not an issue, different manufacturers make d tap connectors to slightly different variants, that are unfortunately not measured. Whenever possible, it is best to use the same manufacturer for power cables, batteries and connectors.

Q: 4. Are there any screw holes on the back of the plate for mounting options other than using the 15mm rod clamps?

A: Yes the V-mount plate is a standard V mount plate and can be mounted without the rods

Q: 5. How long are the 15mm rods?

A: The Shoulder Mount Rig with Manfrotto QR Plate & 15mm Rod System has two sets of 15mm rods 3 x 15mm Aluminum Rod (11.8") are located at the front of the system and 2 x 15mm Aluminum Rod (7.8") at the back of the system.

Q: 6. I am trying to raise a mattebox that sits too low. Can the riser part be raised to where the rods break the plane of the top base?

A: The rods can be raised and lowered. If not enough, then it depends on your matte box and camera. If you have further questions please email us. provideo@bhphoto.com.

Q: 7. Does the Logitech Tap require a pc (Intel NUC)? Or can I plug my laptop and smart tv to Logitech Tap to work with Google Meets?

A: The Logitech TAP Touch Meeting Room Controller + Cat 5e Kit (BH # LOTAPCAT5EK) will work with your laptop and your smart TV. An Intel is not necessary or required.

Q: 8. What are the dimensions of the opening for the magazine?

A: About 14 inches. It takes an 8x10 sheet film holder easily. (although it's VERY tight with the holder and a box of film in the changing bag.) It's fairly comfortable loading 4x5 film though.

Q: 9. IS THE LONDON 8 BEIGE ALSO PAINTABLE?

A: Only the Paintable versions are designed to be painted. They are designed with a special formulation which enables the panels to be spray-painted without affecting the acoustic performance.

Q: 10. Are the mounting options included in this package able to be used as ceiling clouds as well?

A: We do not recommend using the included mounting options for ceilings.