Designed to eliminate the extra step of finishing the screen with trim, the 220V hanging a projector screen from ceilingfrom hanging a projector screen from ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

hanging a projector screen from ceilingThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24709EBL.

159" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Description says it is dimmable with an external dimmer. What is a suitable dimmer for these lights?

A: For a non professional dimmer you can use # imd1000 or any heavy duty dimmer with an Edison outlet

Q: 2. Can i swap an led bulb with this unit?

A: Yes, the lamp is replaceable for the ARRI 300W Plus Tungsten Fresnel (120-240 VAC). Please see the link provided. https://bhpho.to/3V3TkEe

Q: 3. can you use multiple watt bulbs?

A: It is 120-240VAC; however, it will work with 220-240 AC voltage but you need the appropriate bulb and adapter. I have used multiple watt bulbs in mine and have never had an issue. You just need the adapter. I hope this is helpful! Good luck!!

Q: 4. Which color temp will give the most power? How much power do you lose when toggling between tungsten. daylight and party colors?

A: According to Arri, the output is slightly higher at 5600K. As for using the light in color mode, that would give a similar output to using the light at 5600K, being that there is very minimal color shift.

Q: 5. Does the Arri 300 come with the barn doors or are those an additional cost item?

A: Unfortunately, the dedicated barndoors are not included with this fresnel. The barndoors you could use are Arri 4 Leaf Barndoor Set for 300W Fresnel, 125W HMI, 200W Pocket PAR, B&H # ARBD4F300. Please see the following link for reference: a href= http://bhpho.to/1FBtzes target= _blank http://bhpho.to/1FBtzes/a

Q: 6. Do you sell a phone clip? If so will it fit ALL Android phones and can it be used to securely rotate the phone from horizontal to VERTICAL?

A: Hi Laura, You could use the Ziv Phone and GoPro Mount Kit #ZIPHGPM to mount an Android or another phone measuring from 2.3 to 3.6" wide. When combined with the TELESIN U-Hanging Neck Bracket #TETEHNB001, the phone can then be positioned either horizontally or vertically.

Q: 7. In order for these to work what do they have to be attached to?

A: These mics require 3 pin XLR cables and phantom power.

Q: 8. What is the HMI equivalent of this light? Trying to understand the maximum output.

A: Since this light is rated with an equivalent of 1700 watts of tungsten, HMI would be about 4 times the light output of tungsten, essentially giving you close to output of a 400-575w HMI.

Q: 9. Can I fit a lamp softbox on this light?

A: Yes you can use a softbox that's made to withstand heat by getting the correct speed ring under recommended accessories for this fixture.

Q: 10. Hello there!I am new in this and I have some questions. I am planning to buy some of this lights. I already have the regular ones with bulbs and softboxes.Does this aril ight it get hot like a house light bulb or hotter?Can I put a softbox on it or it will burn it?what about If I put it aiming to close to the wall or paper backdrops? would it burn them out?Thanks!!!

A: Tungsten halogen fixtures like this one would produce a lot of heat and require special softboxes to withstand the heat. It is not advisable to place this light close to a wall or paper backgrounds at risk of fire. A suitable softbox you can use is the Chimera XS Video Pro Plus 1 Softbox (16 x 22 ) B&H # CHVPP1BXS which attaches to this Arri fresnel with the Chimera Speed Ring, Aluminum for Video Pro Bank, B&H # CHSRAC5VP.