Designed to eliminate the extra step of finishing the screen with trim, the 220V hanging a projector screen from ceilingfrom hanging a projector screen from ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

hanging a projector screen from ceilingThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24709EBLI.

159" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Video Projector Interface    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is this a single bracket or a pair?

A: The On-Stage SS7990 Hanging Speaker Bracket is a single bracket. The bracket mounts to a wall and provides multiple tie points to support a hanging speaker. The steerable T-bar rotates 180° to align the speaker with the audience. And for elevated mounting applications, the integrated pull-back point angles the speaker downward.

Q: 2. Hello there!I am new in this and I have some questions. I am planning to buy some of this lights. I already have the regular ones with bulbs and softboxes.Does this aril ight it get hot like a house light bulb or hotter?Can I put a softbox on it or it will burn it?what about If I put it aiming to close to the wall or paper backdrops? would it burn them out?Thanks!!!

A: Tungsten halogen fixtures like this one would produce a lot of heat and require special softboxes to withstand the heat. It is not advisable to place this light close to a wall or paper backgrounds at risk of fire. A suitable softbox you can use is the Chimera XS Video Pro Plus 1 Softbox (16 x 22 ) B&H # CHVPP1BXS which attaches to this Arri fresnel with the Chimera Speed Ring, Aluminum for Video Pro Bank, B&H # CHSRAC5VP.

Q: 3. Just wanted to make sure this came with the smart phone adaptor and what the width of phone it would handle ?

A: No, a phone mount is is not included with the TELESIN U-Hanging Neck Bracket for Action Cameras & Smartphones (Large). You could pair the Ziv Phone and GoPro Mount Kit (BH #ZIPHGPM • MFR #PHGPM) with the neck bracket, it will accommodate phones with a width of 2.3 to 3.6".

Q: 4. Is it equally as functional for iPhone camera mount and use from the neck?

A: Sure, you could use the TELESIN U-Hanging Neck Bracket for Action Camera with an iPhone.

Q: 5. Description says it is dimmable with an external dimmer. What is a suitable dimmer for these lights?

A: For a non professional dimmer you can use # imd1000 or any heavy duty dimmer with an Edison outlet

Q: 6. How does this mount? Can it mount to a drop ceiling?

A: The U853AUPM features a permanently attached 25 foot cable that would connect to the AT8534 wall/ceiling plate power module. The module is designed to be mounted in a standard metal U.S. single-gang electrical box. https://bhpho.to/2rW1oWG The mic itself can be hung via the cable with the included wire hanger or attached to mic stand with included stand mount.

Q: 7. What is the color temperature of the lamp?

A: 3200 K

Q: 8. Can i swap an led bulb with this unit?

A: Yes, the lamp is replaceable for the ARRI 300W Plus Tungsten Fresnel (120-240 VAC). Please see the link provided. https://bhpho.to/3V3TkEe

Q: 9. In order for these to work what do they have to be attached to?

A: These mics require 3 pin XLR cables and phantom power.

Q: 10. Is there a burn-in time for this? It smells horrible. Also, when I open it up to full flood, the light shuts off. Is it shorting?

A: this unit like most with a quartz lamp produces a great deal of heat. i would expect some burn-in time. this is a problem made worse in dirty or dusty environments. the fact that you are losing output at full flood raises other questions. i don't think you have a shorting problem (that would overload the circuit feeding the instrument and cause the protective breaker to trip. then there would be no power to illuminate the lamp when you returned to spot or mid-focus positions. it is likely that there is a loose connection in the feed wires which is stretched to the point where contact is broken and is regained when the position of the lamp carriage is moved again. if this is the case there may be a problem with insulation or some other material in the lamphouse touching or getting too near to the lamp (bulb) causing the burning smell.. pop the lamphouse and do some careful inspection of the socket, feed wires and focusing mechanism. be sure unit is unplugged when you do this. i don't want to responsible for your getting a shock if there is an electrical issue.this is not a normal situation and if you can't find a simple explanation quickly it is time to box the unit up and return it for a functional one. in my experience arriflex and b&h are both exceptional service providers and genuinely concerned about quality and customer satisfaction.