Designed to eliminate the extra step of finishing the screen with trim, the 220V bedroom ceiling projector screenfrom bedroom ceiling projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

bedroom ceiling projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 70118EBL.

137" Diagonal / 16:10 Aspect Ratio    Cinema Vision Screen Finish    1.3 Gain / 90° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Low Voltage Control (LVC)

Cinema Vision is designed to provide a higher amount of brightness for lower output projectors. Its increased reflectivity enhances brightness in situations where a moderate level of ambient light is present. Ideal for video images. Cone: 90° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black backing to retain projected brightness
• Seamless surface

Related Questions and Answers

Q: 1. can we coonect this to the preout of denon x4500H or x3600H ?

A: Yes, you can connect to one of the zone pre amp outs, or if you're going to use this to power rear speakers you can come out the surround pre amps. You have quite a bit of flexibility with the Denon receivers.

Q: 2. Are these speakers wireless?

A: No they are not. These are passive, wired speakers which draw the audio signal and power from the SONOS AMP component.

Q: 3. Would this be sturdy enough to hold a roll of seamless paper?

A: These are designed to be used with the Impact Varipoles. The Varipoles support the actual weight of the roll.

Q: 4. KUPO's website gives conflicting capacities for this mount. "Up to 33lbs" & "Maximum Payload Capacity: 15lb" Which is correct?

A: The Kupo website has a typo for the load capacity specification of the Kupo Universal Projector Mount (B&H # KUKD303112). It should read 15 kg instead of 15 lb. 15 kg equals 33 lb.

Q: 5. Does it works with turntable

A: The Sonos Amp 250W Stereo Power Amplifier will work directly with a turntable that has a built in phono preamp. If the turntable does not have a built in phono preamp then you will need a phono preamp between the turntable and the Sonos Amp, like BH #BEVP549 or B&H # ROVP29 for example.

Q: 6. Do these install into a standard 8in speaker ring?

A: In the box, these Sonos In-Ceiling by Sonance speakers include a template to cut the correct size hole in your ceiling for mounting. The installation instructions are available in the manual here: https://www.bhphotovideo.com/lit_files/685190.pdf

Q: 7. can I use my Music Hall 5.1 turntable directly into this unit? So the Q is... does the AMP have phono pre-amp?

A: No, this amplifier does not have a phono stage pre-amp. You would need a dedicated phono preamp. Music Hall makes some very high quality ones to go with their turntable. Such as, the Music Hall Bellari vp130 mk2 Tube Phono Preamp with Headphone Amplifier for Moving-Magnet Cartridges. https://www.bhphotovideo.com/c/product/1483524-REG/music_hall_vp_130mk2_tube_phono.html

Q: 8. If this attaches to the ceiling joist then how do you run the cables into the ceiling? Wouldnt the circular hole be blocked by the joist?

A: You may have to drill some holes. If you were mounting above ceiling tiles, the cable could exit before the joist.

Q: 9. Can this be paired with soon sub mini?

A: The Sonos Amp 250W Stereo Power Amplifier (Black), BH # SOAMPBL, will with the Sonos Sub Mini Wireless Subwoofer (Black), B&H # SOSUBMINIBK.

Q: 10. I am looking for a solution that will allow me to point my projector straight down onto a table. Will this bracket allow this?

A: The Kupo Universal Projector Mount (BH # KUKD303112) will allow for flexible 360 degree and vertical orientation with laser or LED projectors.