Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. For someone who owns the boom.. can you measure the maximum extension? Ive seen some reference to 83 inches and some to 95 inches

A: Length 46.46 to 85.4"

Q: 2. Is this enclosure compatible with the Samsung 960 PRO m.2 NVMe SSD?I heard some comments about b key, m key, so wasn't sure

A: Yes it is. The listed device uses M-key which is compatible.

Q: 3. How is anyone using this "T" slot in a grip head? The locating pin in all of my grip heads prevent the grips bolt from sliding into the "T"

A: The following item requires a grip head to work as boom. Impact Grip Head for Lights and Accessories - 2.5" Diameter (Chrome) https://bhpho.to/3CUzYWN

Q: 4. Do i need to buy kupo grip head seperatly?

A: You will need a grip head to attach it to a stand https://bhpho.to/2IVmajI.

Q: 5. What size Gobo screen do I purchase to go with this?

A: Gobos: (E): 37.3 mm outside, 22 mm image, 1 mm max thickness

Q: 6. Is this SSD single-sided (that is, all chips on one side of the board or module), or double-sided? I'm trying to find an SSD to fit into a really tight space and need single-sided.

A: This is a standard M.2 chip. It's not specified if single or double sided.

Q: 7. Will this work with SSD from Mac Pro 2013?

A: Depends on what form your SSD card is.

Q: 8. Does the maximum load of 11 pounds include the counterweight? Or is it 11 pounds on the extended end, and then the counter weight is in addition to that?

A: I've personally used it to arm out a Kino Diva 401 with a 15lb sandbag on the back. As long as it's rigged correctly at the knuckle, I'd say the 11lb weight limit is an engineers rating. That being said, a weak point is definitely swivel counterweight hook on the back. I've not taken it apart to see how it's attached, but it can't be very secure as it swivels to prevent weights from falling off. However the real weak point is the operator. Putting 1lb out at full extension can still severely hurt someone if it's not rigged correctly, regardless of the brand of boom. Always use common sense over manufacturers recommendations.

Q: 9. Will this fit on the Kupo c stand riser kit? Wanted to replace the 40" arm with this one since it extends to twice the length for overhead shots

A: Yes, this Kupo Steel Baby Boom can fit a Kupo C-Stand Riser equipped with a 2.5" grip head.

Q: 10. How many inches/cm wide do the jaws open?

A: The clamp opens to 2.3".