With an all-in-one design, the usb network bridge cablefrom usb network bridge cableis an airMAX product meant to function as customer premises equipment (CPE). With a more concentrated, direct signal clients benefit from improved noise immunity to as this bridge is capable of filtering out much of the noise that can degrade the signal. With Ubiquiti's own inner feed design installation of the PowerBeam airMAX Bridge has been greatly simplified as there is no longer a need for any cabling. Once installed the included airMAX technology helps network administrators to manage and monitor the network. From intelligent QoS to scalability Ubiquiti has provided the tools necessary to create long range networks offering reliable wireless network access to a large number of clients.

Atheros MIPS 74Kc, 560 MHz Processor    64MB DDR2, 8MB Flash Memory    5725 to 5850 MHz Operating Frequency    15.7" Dish Reflector    airMAX Technology    Integrated InnerFeed Technology    airOS Firmware Technology    airView for Advanced Spectrum Analyzer    Innovative Mechanical Design

The PowerBeam directs RF energy in a tight beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, to improve noise immunity. This feature works in areas crowded with other RF signals of the same or similar frequency.

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam is versatile and cost-effective to deploy. The antenna feed has a thin gray ring around the center of the cap.

Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class. With intelligent QoS, priority is given to voice/video for seamless streaming and is capable of high-speed, carrier-class links.

airOS is a highly developed, user-friendly Ubiquiti firmware technology. The firmware architecture enables high-performance and outdoor multi-point networking. It features protocol support, Ubiquiti channelization, spectral width adjustment, ACK auto-timing, AAP technology, and multi-language support.

Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality. Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. With Waterfall you can aggregate energy over time for each frequency, Waveform aggregate energy collected, with real-time energy shown as a function of frequency, and you can also automate airView to record and report results with recording.

airControl is a powerful and intuitive, Web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices. It features network map, monitor device status, mass firmware upgrade, Web UI access, manage groups of devices, and task scheduling.

With built-in mechanical tilt, the mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. The number of fasteners is reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. The antenna feed can be detached with the push of a button.

Fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets made of galvanized steel that is powder-coated for corrosion resistance. The redesigned pole bracket resists paint loss for improved corrosion resistance.

Related Questions and Answers

Q: 1. Do I need to purchase a UniFi OS console in order to configure this?

A: The Ubiquiti Networks UniFi Building-to-Building Network Bridge (2-Pack) is pre configured but a UniFi Cloud Key (1.0.5 or newer) or UniFi Dream Machine (1.0.1 or newer) or a Linux, Mac OS X, or Microsoft Windows 7/8/10 would be required to run the UnFi OS console software.

Q: 2. So the "virtual sound card" is not necessary when using this device?

A: There is no additonal soundcards or software needed to use this I/O.

Q: 3. Can the Dante port be connected directly to the ethernet port of a PC, giving the PC access to the I/O?

A: No. The Dante port would be connected to a network switch that is also connected to the rest of your Dante devices and the USB port of the Shure ANIUSB-MATRIX would be connected to your computer.

Q: 4. this TC-NT2 is okie to use for basic cable test for Rj45 to Rj-45 cat5e?

A: Yes, the TRENDnet TC-NT2 Network Cable Tester is capable of testing the continuity and wiring configuration of RJ-45 cables.

Q: 5. Can I use this device with a Shure MXA910 Ceiling Array Microphone?

A: Yes. According to the following page from Shure; "You can use a web application to control the MXA910 and Dante Controller to route audio. Download the Shure Web Device Discovery application to access your device’s web application." https://pubs.shure.com/guide/MXA910/en-US

Q: 6. Can I use this device to: 1) send analog out to ATEM Mic In. 2)USB to comp-1 streaming soft. 3) Dante to comp-2 running zoom?

A: Yes, the analog output from the Shure ANIUSB-MATRIX USB Audio Network Interface can be connected to the mic input on the Blackmagic Design ATEM Switcher (set the input level on the ATEM for line level audio signal). The USB port from the ANIUSB-MATRIX can be connected to a computer for streaming audio, and the Dante port on the ANIUSB-MATRIX can be connected to a network switch to receive Dante audio, Power over Ethernet (PoE), and data from the control software, then the second computer can be connected to the network switch to send and receive audio for the Zoom meeting.

Q: 7. able work Stella reflex??

A: The Elinchrom Skyport Bridge is not compatible with the Light & Motion StellaPro Reflex LED/Flash Head.

Q: 8. Can this be used to determine where a cable is broken?

A: This item won't tell where the cable is broken, but will identify which cable is an issue.

Q: 9. Can the Dante side of the AVB-D16 operate in AES-67 mode?

A: The PreSonus AVB-D16 Network Bridge 16x16 Two-Way AVB-to-Dante does not feature an AES67 mode or purport the ability to communicate with other devices using this protocol.

Q: 10. Hi Guys, the TC-NT2 you have pictured is the discontinued Version 1.0 . Trendnet have updated this to Version v1.1R , is this the one you are shipping?

A: Hi Guys, it looks like you have updated the picture to the Version v1.1R now.