Designed to eliminate the extra step of finishing the screen with trim, the 220V ceiling tv projector screenfrom ceiling tv projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

ceiling tv projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 21814EBL.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.1 Screen Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black backing to retain projected brightness
• Seamless surface

Related Questions and Answers

Q: 1. Is it Bluetooth compatible so I can connect it to my out door speakers in the backyard

A: No it is not bluetooth compatible to pair with external speakers. Use this adapter: Aluratek ABCD54F Switchable Bluetooth Audio Transmitter and Receiver BH #ALABCD54F: https://bhpho.to/2VdQobi

Q: 2. Would this be sturdy enough to hold a roll of seamless paper?

A: These are designed to be used with the Impact Varipoles. The Varipoles support the actual weight of the roll.

Q: 3. Does it works with turntable

A: The Sonos Amp 250W Stereo Power Amplifier will work directly with a turntable that has a built in phono preamp. If the turntable does not have a built in phono preamp then you will need a phono preamp between the turntable and the Sonos Amp, like BH #BEVP549 or B&H # ROVP29 for example.

Q: 4. Hi, does this item have an incorrect photo? It doesnt seem to match the description.

A: The photo for the Kupo TV Coupler (Black) and the description are correct.

Q: 5. Can I use my Bose 161 speakers with this amp as they are rated at a max of 100w?

A: You are able to use it, you just would not want to turn the volume at max. This could then blow out the speakers.

Q: 6. Are these speakers wireless?

A: No they are not. These are passive, wired speakers which draw the audio signal and power from the SONOS AMP component.

Q: 7. What is the minimum acceptable impedance for the speaker output. (Can I connect four 8 ohm speakers?)

A: The Sonos Amp 2.1 allows for two speakers up to 125 watts at 8 ohms, plus a subwoofer to be connected. In order to connect four speakers, you would run them in parallel, two on the left and two on the right, and each speaker would operate at 4 ohms. The total wattage the speakers should require is 125 watts per side. So each speaker should be rated 60 watts or under at 8 ohms, in order for this amp to power them safely.

Q: 8. Can this be paired with soon sub mini?

A: The Sonos Amp 250W Stereo Power Amplifier (Black), BH # SOAMPBL, will with the Sonos Sub Mini Wireless Subwoofer (Black), B&H # SOSUBMINIBK.

Q: 9. Can I use Sonos App to switch between listening to Stereo RCA Input or Streaming from Airplay?

A: Yes. The SONMOS App allows selection of the input source.

Q: 10. can I use my Music Hall 5.1 turntable directly into this unit? So the Q is... does the AMP have phono pre-amp?

A: No, this amplifier does not have a phono stage pre-amp. You would need a dedicated phono preamp. Music Hall makes some very high quality ones to go with their turntable. Such as, the Music Hall Bellari vp130 mk2 Tube Phono Preamp with Headphone Amplifier for Moving-Magnet Cartridges. https://www.bhphotovideo.com/c/product/1483524-REG/music_hall_vp_130mk2_tube_phono.html