For larger venue installs, the 220V ceiling mount for projector screen(fabric, roller, and motor available separately) from ceiling mount for projector screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioning is provided to help ensure the smoothest surface possible.

ceiling mount for projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24719EFL.

220" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Smooth Roll Technology    Slim-Tab Lower-Profile Tab Design    Installs Above the Ceiling    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• UL Plenum rated case
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. can you shorten the stem?

A: This column mount is not adjustable: Dimensions: 4.6 x 19.7" (116.5 x 500 mm)

Q: 2. Does this work with the BenQ HT2050A projector?

A: The BenQ CM00G3 Ceiling Mount for Most BenQ Projectors BH #BECM00G3 is compatible with the BenQ HT2050A Full HD DLP Home Theater Projector BH #BEHT2050A.

Q: 3. I am looking for a solution that will allow me to point my projector straight down onto a table. Will this bracket allow this?

A: The Kupo Universal Projector Mount (BH # KUKD303112) will allow for flexible 360 degree and vertical orientation with laser or LED projectors.

Q: 4. What is the length of the pole?

A: According to the specs page, it is 19.7" long.

Q: 5. Do you think it could mount a Logitech webcam? (C920 to be exact)

A: The Smith-Victor Ceiling Mount with 5.0' Telescoping Extension states it includes a 3/8 stud, while the Logitech C920 HD Pro Webcam indicates it has a standard female 1/4 -20 tripod thread. The Novatron Adapter - 3/8 Female to 1/4-20 Male, B&H # NOA38.2520, would be the required adapter to connect the Logitech C920 HD Pro Webcam to the Smith-Victor Ceiling Mount.

Q: 6. This mount comes with 2 attachments. One is obviously the scissor mount for use with a drop ceiling, but what is the other accessory for? Here's a photo - it's the item on the left.http://creativeillusions.biz/mount.jpg

A: From the manufacturer I checked into this and was told that there is a loop on the safety cable that goes over the scissor mount stud. The safety cable is then secured to the stud by the item on the left.

Q: 7. Can we use this to mount a camera? Are there any accessories recommended for that?

A: While the above item is not designed for use with cameras, you may purchase the Novatron Adapter - 3/8 Female to 1/4-20 Male, B&H # NOA38.2520, the Oben 3/8 -16 to 1/4 -20 Reducer Bushing, B&H # OB1039, and the Barska AF12544 Aluminum Ball Head, B&H # BABJTH, for your usage needs to connect a camera to this item.

Q: 8. Is this will work with MH741?

A: Yes it will

Q: 9. Is there a way to convert this from a scissor clamp to a wall/ceiling clamp? Need to attach to drywall not a drop ceiling.

A: For wall mount consider this , Impact 7 ft HD Wall-Mounted Boom Arm BH #IMLSAWMB7HD

Q: 10. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.