For larger venue installs, the 220V ceiling mounted screen for projector(fabric, roller, and motor available separately) from ceiling mounted screen for projectoris designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioning is provided to help ensure the smoothest surface possible.

ceiling mounted screen for projectorThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24720EFL.

247" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Smooth Roll Technology    Slim-Tab Lower-Profile Tab Design    Installs Above the Ceiling    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• UL Plenum rated case
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Our goal is to place speakers around a room, easily, and run the cables back to something to have microphones used with them. Is this a possibility with this item? If so, what all do I need?

A: Typically this setup would require a mixer, an amplifier, cabling and microphones. Contact us via e-mail for specific recommendations: Audio@a href= http://BandH.com target= _blank BandH.com/a

Q: 2. What is the weight limit that can be mounted to this?

A: The manufacturer has not provided a specification for the load capacity of the Godox VSM-B01 Desk-Mounted Boom Arm, but it can safely support most large diaphragm microphones with a shockmount and pop filter attached.

Q: 3. Help Needed . . . there are two different and unfortunately conflicting answers to the question: "Can the boom arm be be locked in a specific panning position?".

A: This is the correct answer "Unfortunately, no... the only locking directions/positions are the extension arm - out and in - and in the angle up and down... I wish they added a locking feature to the pan (side to side) position " There is no lock on the panning swing side to side swing movement.

Q: 4. How large is the mounting plate to the wall?

A: The wall plate is 3.2". x 6.0"

Q: 5. 29inches?

A: The dimensions of this attenuator are:Dimensions (HxWxD) 2.75 x 1.7 x 2.5 (6.985 x 4.445 x 6.35 cm)

Q: 6. I have a set of Impact 600 lights with the octagon shadow boxes. do I need any other accessories in order to have my light suspended from this bar? Julia

A: No, the light will fit straight on the arm

Q: 7. Can I connect 2 of these speakers to a computer?

A: These speakers require a Supply Voltage of 24 V DC and would not be suitable for direct connection to a computer.

Q: 8. will this work on the 135i scanner?

A: Yes, the Plustek 35mm Mounted Slides Holder works with the Plustek OpticFilm 135i Film Scanner.

Q: 9. is it compatilble whith mk7 technicks?

A: Yes see it is on list of recommended cartridges for the Mk 7 https://www.bhphotovideo.com/c/product/1457574-REG/technics_sl_1200mk7_direct_drive_turntable_system.html/accessories

Q: 10. Is it not advisable to mount this outdoors?

A: The Impact 7' HD Wall-Mounted Boom Arm can be mounted outside but it is not designed for that purpose. This product is not weather resistant.