Designed to eliminate the extra step of finishing the screen with trim, the 220V install projector screen on slanted ceilingfrom install projector screen on slanted ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

install projector screen on slanted ceilingThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24711EFLSI.

94" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will this work for the Behringer x2222usb mixer? Specifically will the rear I/O jacks be accessible?

A: If you have a Rack Gear for x2222usb yes you could.

Q: 2. Can this be paired with soon sub mini?

A: The Sonos Amp 250W Stereo Power Amplifier (Black), BH # SOAMPBL, will with the Sonos Sub Mini Wireless Subwoofer (Black), B&H # SOSUBMINIBK.

Q: 3. What is the minimum acceptable impedance for the speaker output. (Can I connect four 8 ohm speakers?)

A: The Sonos Amp 2.1 allows for two speakers up to 125 watts at 8 ohms, plus a subwoofer to be connected. In order to connect four speakers, you would run them in parallel, two on the left and two on the right, and each speaker would operate at 4 ohms. The total wattage the speakers should require is 125 watts per side. So each speaker should be rated 60 watts or under at 8 ohms, in order for this amp to power them safely.

Q: 4. Will this case fit Yamaha DM3-D?

A: No, the ProX XS-19MIX8U Signature Series 19" Slanted Rack Mount Mixer Case (8 RU) is not compatible for use with the Yamaha DM3-D Digital Mixing Console. As a compatible option, we have the SKB iSeries 2015-10 Yamaha DM3 Digital Mixer Hard Case (B&H # SK3I20151DM3).

Q: 5. will this fit the behringer XENYX x1832? And does it come with the cage nuts and screws??

A: Yes, This item will fit XENYX x1832

Q: 6. Where is the country of origin for this product?

A: The country of origin is Mexico.

Q: 7. what cable connects this to a Sony A7s3?

A: A full HDMI to full HDMI cable.

Q: 8. will mackie 1604 fit ?

A: It will not fit. But these will: Gator Cases G-Tour 19x21 ATA Mixer Flight Case with Wheels - for Audio Mixers up to 19x21" BH #GAGTOUR19X21 Gator Cases G-MIX 19x21 ATA Polyethylene Case - for Specific Audio Recorders and Mixers BH #GAGMIX19X21

Q: 9. Internal width?

A: The Odyssey FZGS1116WDLXBL ships with rpre installed rack rails designed to accommodate standard 19 rackable gear. Front rail to back cover depth is: 18 .

Q: 10. Can this speaker be used while horizontal?

A: Yes, these can be oriented in a horizontal position. If using the supplied wall mounts you will use the attachment points on the side of the speaker.