Designed to eliminate the extra step of finishing the screen with trim, the 220V ceiling bracket for projector screenfrom ceiling bracket for projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

ceiling bracket for projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24711EBLSI.

94" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Which Hikvision Dome Cameras are "Selected" to be compatible with each Hikvision inclined ceiling mount bracket?

A: There is no specific list that they have for all the cameras. We usually start with the camera and then make our way to the mount. I recommend that you reach out to our sales team to assist you with your camera.

Q: 2. Does this kit come with 2 brackets?

A: The Electro-Voice MB200W comes with only 1x bracket.

Q: 3. I use a Yongnuo Speedlite YN600EX-RT II with my Canon 5D Mark IV. What would people recommend for me to use to connect my flash to the camera using this bracket. I worry that something like the Vello TTL cable will raise up the flash too much and not fix the whole, "side shadow problem," which I assume this bracket is meant to solve to begin with. Thoughts? Thanks!

A: The TTL cable will not raise the flash that much. If you are worried about it being a little out of position because of the cable, or you want greater flexibility, The Yongnuo YN-E3-RT II Wireless Speedlite Transmitter for Canon linked here can be an option. https://bhpho.to/2QNUvJb. This will allow one to place the Flash in any position you want.

Q: 4. Which inclined mount can be used with the Ring Floodlight Cam for under eave mounting?

A: RING does not offer this accessory.

Q: 5. Will this work with Hikvision DS-2CD2185FWD-IS dome camera?

A: https://www.bhphotovideo.com/c/product/1162129-REG/hikvision_ab110_inclined_ceiling_mount.html is the correct mount.

Q: 6. Will this mount fit an Optoma EH412ST projector?

A: Yes - but please note: To use this mount, purchase a separate custom Peerless PAP Adapter Plate made for your model projector.

Q: 7. Is this the right mount for DS-2CD2383GO-I camera?

A: Yes, the ABM will work with the camera that you listed.

Q: 8. I know ring doesn't make a angled mount for the ring flood light pro but I need something like this to mount my camera in the eves. What angle is this?

A: Hikvision does not specify the angle for the Hikvision ABM. See the dimensional drawing here: https://us.hikvision.com/sites/default/files/data_sheet/acc_abmb_071420na.pdf

Q: 9. Will the Q5 work with a Fuji XT-3 or XT-4?

A: You could use the Manfrotto Q5 L Bracket on the Fuji XT-3 and XT-4 cameras. The bracket will cover the ports on the side of the camera and you will have to remove the bracket to change the battery.

Q: 10. Will my speedlight attach directly to this bracket? Or do I need another item?

A: I use a Yongnuo Speedlite YN600EX-RT II with my Canon 5D Mark IV. What would people recommend I use for a connection between my camera and the flash, with this bracket. I worry that something like the Vello TTL Flash Cord would raise the flash up too much and not really solve the whole, "side shadow in portraits" problem, which I assume this bracket is supposed to solve. Thoughts anyone? Thanks.