The 6’ FCS015A-FR Hybrid Fiber Optic Receptacle Breakout Cable SMPTE/ARIB with 6 Connector from Camplex is used for panel mounting in blank panels or as a replacement in hybrid devices. This SMPTE hybrid breakout cable features a Canare FC-Series connector at one end and duplex LC female and copper leads terminated with a 6-pin AMP power connector at the other end. The cable integrates the power line for a TV camera, control line, and optical fiber for video and audio transmission. It adheres to SMPTE standards for HDTV broadcast camera use and is suitable for use in SMPTE rack panels, splice trays, adapters, and wall boxes.

It is assembled with Canare SMPTE standard studio broadcast cable. The cable consists of two single-mode optical fibers and four 20 AWG and two 24 AWG tinned copper conductors cabled around a steel strength element, with an overall tinned copper braid. This general purpose cable is used for studios, patching, and light to medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Assembled with SMPTE cable & Canare and Senko connectors

Electrical assemblies tested for continuity and shorts

Fiber optic assemblies tested for attenuation and back reflection

SMPTE 311M and 304M compliant

19.4 Mb/s to 3 Gb/s transfer speed

Stainless steel assembly

Rubber dust caps

Machine-polished fiber contact

Low insertion and return loss

Related Questions and Answers

Q: 1. Is there any latency with this cable and if so how much?

A: The Pearstone 8K Hybrid Optical HDMI Cable (100') BH #PEHDAO8100 should not have any latency.

Q: 2. Can I run this from my Lumix GH6 to my ATEM mini switcher?

A: Yes, The GH6 has HDMI output that would be able to connect to the Atem Mini when using the Pearstone 8K Hybrid Optical HDMI Cable.

Q: 3. Will the lock mechanism work on the canon c100 hdmi port? If not, what is a cable that will lock in the hdmi port of a canon c100?

A: Yes, it will screw into the small hole next to the HDMI port on the C100. It works great to protect that port from getting loose.

Q: 4. How delicate are these cables, can they take light foot traffic?

A: The Pearstone 8K Hybrid Optical HDMI Cable (15') BH #PEHDAO815 is not made to be stepped on over and over again, as it would damage the quality of the cable.

Q: 5. is the output 48 DC Volts?

A: This model provides active PoE with a 48v DC output that meets the requirements of 802.3at/af.

Q: 6. Does this work with the Sony a7SIII and Ninja V to record Prores Raw?

A: Yes it will. Both devices use HDMI-A connectors and this cable is rated for 4K high speed transmission.

Q: 7. What is the maximum bit rate? Will it handle 150 Mbps?

A: The Pearstone Swiveling High-Speed HDMI Cable with Ethernet (3') BH #PEHDAS103 offers a minimum10.2Gbps and allows up to 18Gbps.

Q: 8. Is the transmission of video from a video camera to a streaming mixer certified at this distance (165')?

A: The Pearstone 8K Hybrid Optical HDMI Cable (165') BH #PEHDAO8165 is made to support 8K at 60 Hz & 4K at 120 Hz from a video camera to a streaming mixer.

Q: 9. Just bought a LGOLEDB7 & Denon AVR-X2300 (HDCP 2.2). My question is this Gefen HDCP 2.2 compatible. Will i get the best results using this as my in between of TVAVR CABLE? Thanks & HAPPY NEW YEAR EVERYONE

A: This is an excellent cable for your installation. It is HDCP 2.2 compliant.

Q: 10. What is the width of the cable?

A: The manufacture does not list the diameter of the KanexPro Active High-Speed HDMI Cable with Ethernet (50') BH #KACHTHDMI50.