Designed for studio, DJ, and live sound applications, the device to boost wifi signalis a dual-channel hum eliminator with both XLR and 1/4" (6.35mm) TRS/TS input and output connectors. Using a fully passive design, without the need for external power, the device can eliminate unwanted 60 Hz hum and buzz caused by ground loops in your signal path.

Housed in a road-worthy rugged metal enclosure, the device can be inserted between any two pieces of line-level equipment at +4 dBu or -10 dBv to quiet hum and buzz caused by excessively long unbalanced cable runs, or when a connection path forms between the grounds of two pieces of equipment in the signal chain. Ground loops are removed while preserving the integrity of the original signal.

The device will automatically convert between balanced and unbalanced signals (and vice versa) when the 1/4" (6.35mm) TRS/TS and XLR connectors are used in any combination. This also allows the Humbuster to be used as a direct box for connecting the unbalanced output signal of a musical instrument directly to the balanced input of a mixing console. The design utilizes high-quality internal components and gold-plated XLR connectors to reduce noise and maintain the fidelity of your signal.

Eliminates 60 Hz Ground Loops    Silences Unbalanced Cable Buzz and Hum    Can Be Used as DI Box    Preserves Signal Integrity    Converts Balanced and Unbalanced Signals    Works with 1/4" and XLR Connectors    +4 dBu or -10 dBv    Fully Passive Design    No External Power Required    Rugged Metal Enclosure

Removes unwanted 60 cycle hum and buzz caused by ground loops

Reduces interference and noise caused by excessively long unbalanced cable runs

Removes hum and buzz without compromising signal quality

Allows you to automatically convert between balanced and unbalanced signals

Allows you to directly connect the unbalanced output of a musical instrument to the balanced input of a mixing console

Supports balanced XLR, balanced 1/4" (6.35mm) TRS, and unbalanced 1/4" (6.35mm) TS input and output connectors

Related Questions and Answers

Q: 1. Can i connect one cd player to three amplifiers to be used one at a time only?

A: The Rolls SS32 Mini Route 3 will not allow you to select the amplifier that is active. All three outputs will be live. You can consider however the Hosa Technology SLW-333. Just make sure to get either some rca to phone cables, or adapters; B&H# HOHPR005X2, B&H# HOAPMRF.

Q: 2. Our school recently started debate class. We are interested in this product. However, what other products go with this to be successful? We want to put this on a podium. What else do I need?Richard Victor Lake Nona High School

A: This unit is designed to be used with the Limitimer Pro-2000 System. Note: One PSL-20V is included in the Limitimer System PRO-2000 or PRO-2000BT Please see the detailed instructions for connection and use:http://bit.ly/1dJNHCG

Q: 3. Is there a case included with the purchase of the NOCO GBX55?

A: The NOCO Boost X GBX55 1750-Amp 12V Jump Starter, B&H # NOGBX55, includes a Microfiber Bag.

Q: 4. How many starts can you get on one charge?

A: That information is not published by the manufacture.

Q: 5. Under outputs it says:XLR Direct Output x8 XLR Transformerless Output x8What's the difference between direct and transformerless?

A: Hi Daniel,one of the outputs on each channel is directly connected to the input, and will give out exactly what is sent in. As far as I know, this it the channel that has no transformer, and will therefor also feed phantom power out. The other channel has an equally winded transformer that does nothing to the physical sygnal, but it gives out a clean sygnal that is isolated and will not allow for a ground loop potential differance to pass through to the source. It does not make sense to me to seperate the direct out, and transformerless out description, as they are the same. I would call it a Direct/Transformerless out, and one isolated trasformer out. But again, this is what I think, and I might be wrong. Hope this helps.

Q: 6. Can this be used as a stand alone device?

A: This is not a stand-alone device. It is intended to be used with the PRO-2000 or PRO-2000BT systems.

Q: 7. I'm also looking for the flexibility to use it as a line level input. It main emphasis is mic. But I see a pad of -29 dB. Will this unit work for line level (synth, +4 dB line out from sound recorders)?

A: I have used it with a Keyboard Line Level out using the pad switch. One line out of the mic splitter was going to a live mixer the other line out was going to an audio interface and DAW for recording. I would very well. Dan

Q: 8. Is it rechargeable or battery operated?

A: The Gefen GefenToolBox HD Pattern Signal Generator requires power from the wall and is not a portable unit with batteries.

Q: 9. Do I need this for each 2400 RX in order to operate from imac in the studio? I know I need the EL19363 USB transceiver

A: I don't think you need this unit at all unless you're planning on using the iphone/ipad app. The el-19363 will connect the Elinchrom software your Mac and transmit directly to the transceivers. I'm not familiar with the 2400RX. my flash heads have receivers built in, but you might need to buy the EL19353 transceivers.

Q: 10. Can I connect 2 amps ( 1 tube & 1 hifi ) to a pair of speakers. The tube amp only has RCA input and banana plugs out. The hifi has RCA input, RCA line output and banana plugs out.

A: Unfortunately you cannot. The SS32 Mini Route 3 is only made for one source with outs.