Ethernet Cable Fiber Splitter

Product Code: eq29065
Availability: In Stock

$934.47 $1,121.36

Qty

6 reviews Write a review

Description
Reviews (6)

The 3' long Multimode LC Fiber Optic 1x3 Splitter Cable from Camplex is an OM3 50u fused passive splitter that offers a handy solution to split optical signal for routing to multiple devices, inputs, or patch panels when used with a Neutrik NZPFD-2 (not included). This 1x3 splitter cable provides a 100 to 33/33/33 split and is designed to operate with 850 and/or 1300nm.

Parameters
Cable Type	Fiber optic, 1 x 3 splitter
Band	850 and/or 1300 nm
Cable Length	3.0' (0.9 m)
Weight	31.9 oz (907 g)

OM3 50u multimode fused optical splitter

Splits optical signal for routing to multiple devices or inputs

100 to 33/33/33 split

LC fiber assemblies split 1 into 3 signals

Operates with 850 and/or 1300nm bands

Can be used with Neutrik NZPFD-2

Related Questions and Answers

Q: 1. So... how long is the cable?

A: 60cm

Q: 2. Why can't I buy just one?

A: Yes. Please review the following item. IndiPRO Tools D-Tap Male to Female Rubberized Extension Cable BH #INPRORBB • MFR #PRORBB https://bhpho.to/3ut6HPe

Q: 3. Would this power two Nucleus-M focus motors and/or the handles that come with them? Can’t really find any info on it, or I’m not looking in the right places. Thanks!

A: Unless you have additional products that require D-Tap power this is not needed with the Nucleus-M. The Nucleus-M comes with a D-Tap Cable along with daisy chain cables for powering the motors. The controllers are battery powered on the Nucleus-M.

Q: 4. This can be used with a self-powered remote to trigger the shutters on two DSLR cameras simultaneously?

A: The Pluto Flash Splitter Cable may work in that scenario. Only way to know is to try it out. It could be that when the signal splits that the power is not strong enough to trigger the camera or it could work. Only way to know is to try it out.

Q: 5. Does it have an screw holes at the back?

A: There are no mounting points on the Watson Pro D-Tap 1x4 Splitter Cable.

Q: 6. Can this be used to attach two LANC controllers to one camera?

A: No, the Pluto Flash Splitter Cable is not made to attach LANC controllers.

Q: 7. Can I power both a zacuto gratical eye and a SmallHD502 using this adapter - most of these splitters are rated for max of 10W, whereas these two devices wils require approximately 13W at full tilt. If not this Watson Dtap splitter, has anyone used another splitter for greater than 10W draw successfully? Thanks!

A: I'm pretty sure the rating is in amps, not watts. 14.4 volts * 10 amps = 144 watts.

Q: 8. Im looking for a way to change the AES signal out of my Sound Craft stagebox 32r ( connected to a ( Sound Craft impact ) so I can use all my outputs for my Behringer P2 body packs - would this product achieve my goal?

A: This is a passive splitter cable designed for use with AES EBU, this will split an AES EBU signal into 2 outputs as Reine G. stated. I do not believe that Behringer is working with AES so I don't think this is what you are looking for. You should contact an B&H Sales rep to assist you in your request. I am sorry for the delay. Thanks!

Q: 9. Is this compatible with Wireless Go II as well?

A: It is not as the Rode Wireless Go II makes this kit unnecessary. The Wireless Go II is a receiver that accepts two transmitter. This kit is designed for two separate receivers.

Q: 10. Does this support a bidi SFP? If so which one/which brands would be compatible?

A: The StarTech Gigabit Ethernet Fiber Media Converter BH #STMCM1110MML does not support BiDi SFP.

Shawn	19/08/2024
[3.0' (0.9 m)] This item was plug and play I was up and running with it within 5 min Please note that it does come with one 1G Fiber Module so you only need one more for your switch and an LC multimode fiber cable 5

Neil	11/06/2024
[3.0' (0.9 m)] This splitter cable is actually a standard 1/8 splitter cable with adaptors on each end to give the required size for the Pluto cables.� Pluto cables have smaller plugs than the standard 1/8" plugs.� It works very well and you can use a 1/8" extension cables with this and just put the adapter on the end of the extension cable. 5

Russell	05/06/2024
[3.0' (0.9 m)] I AM USING THIS SPLITTER CABLE BACKWARDS SO THAT I HAVE TWO TRIGGERS IN TO ONE CAMERA SO FAR IT IS WORKING FINE DOES ANYONE SEE A PROBLEM DOING THIS? 5

Richard	28/04/2024
[31.9 oz (907 g)] I'm not using this for flash. Instead I bought two generic universal bower camera triggers. They come with various attachments for triggering different cameras. The attachments use the 2.5mm style jacks. This splitter comes with the 2.5mm to 3.5mm adapters. This allowed me to use one trigger to fire to cameras at the same time. 5

Envision	09/04/2024
[3.0' (0.9 m)] as an installer these pieces are primo. up and running like a champ 5

Brian	30/11/-0001
[3.0' (0.9 m)] I purchased this to allow me to trigger two cameras simultaneously to do Stereo Views Photography. My shutter release cable only accommodates shooting with one camera so with the Flash Splitter cable, I was able to shoot both at the same time to capture a right and left image. This helps me to shoot moving objects such as people, animals, vehicles and motion in landscape views. This looks like a typical mini audio stereo cable but it actually is 2.55mm instead of the stereo 3.5mm. 5