You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Ilford Xp2 Super 35mm Black And White Film 50-pack

Ilford Xp2 Super 35mm Black And White Film 50-pack
  • Product Code: eq2924
  • Availability: In Stock

$1,873.50 $2,416.82

Ilford XP2 Super 35mm Black and White Film 50-Packis a high-speed chromogenic black and white negative film that can be processed alongside conventional color negative films in C-41 chemistry. It has a nominal sensitivity of ISO 400/27°, however can be under- or overexposed in order to adjust contrast as well as the balance of grain and sharpness. When rated at ISO 400, the most neutral balance between a fine grain structure and high sharpness will be afforded. Its wide exposure latitude can also be used to better control highlight and shadow values, as well as an expansive range of middle tones. Additionally, XP2 Super is designed for printing on traditional black and white papers, with Multigrade contrast filters, as well as on RA-4 color papers with maintained print color neutrality.

This item is one 36-exposure roll of 35mm film in a DX-coded cassette.

Panchromatic B&W Chromogenic Neg. Film    ISO 400/27° in C-41 Process    Very Wide Exposure Latitude    Fine Grain and Sharpness    Can Be Printed on Conventional B&W Paper

Parameters
Film Format35mm
Number of Exposures36
Film TypePanchromatic B&W Chromogenic Negative
ISO/ASA Film Speed400
Film ProcessingC-41
Film BaseAcetate
Number of Rolls1
Layer Thickness125.0 µm
Packaging Info
Package Weight0.07 lb
Box Dimensions (LxWxH)2.3 x 1.4 x 1.4"

Related Questions and Answers

Q: 1. What happens if you develop 2 35mm and then reuse it to develop 2 more?

A: The results could be less than ideal such as under developed and lower contrast negatives.

Q: 2. Can we reuse the fixer? For up to how many rolls?

A: A general rule-of-thumb would require you to test your fixer working solution immediately after mixing to find its clearing time, then when it takes twice as long as the original test to clear the film, you may discard it. In practice, to test your working solution, you can take an unexposed piece of film (such as the film leader) and place a drop of fixer on the emulsion side of the film. Leave it for approximately 20-30 seconds. Then place the film into the fixer, ensuring it is covered. Time how long it takes for the clear spot to disappear (when you can no longer tell the spot you placed the drop of fixer from the rest of the completely clear film). This would be the fixer's clearing time. You would double this time amount to find the amount of time it takes to fix your film (i.e., if it took 2 minutes 10 seconds for the film to become completely clear and the dot to disappear, you would fix film for 4 minutes 20 seconds). You would test your fixer every time before using the fixer. When, during your test, it takes twice as long to fix your scrap film leader to clear as it did when you first mixed the working solution, it may be discarded and you may make a new working solution. (if you wish, you may wait until it takes triple the time your original test took to clear, but this would result in extremely long fixing times).

Q: 3. Can I develop this film using C41 developer? Thanks

A: No way... This is a standard B&W film. Best developer to use is Rodinol 1/32 at 8.5 minutes. This is definitely NOT a C-41 film.

Q: 4. What is the current expiration date on XP2 bulk rolls?

A: This film is currently not in stock and takes about 1-2 weeks and so the expiration date is not available at this time.

Q: 5. When using this film, is a filter recommended?

A: What kind of filter do you think of? This film, like any BW-film, can be used with filters. It is not a question of the film. It is a question of the result you like to achieve. I would always recommend using filters when working with BW-film in the landscape. Yellow, orange, red turn in different degrees blue darker and the own filter-color brighter. By that you get a darker sky (BW-film mostly translates the color blue not dark enough) or you gain contrast, e.g. between green and red/yellow. Depending on your subject this might be useful. I would be careful doing portraits. Red cheeks or lips are getting pale with a red- or orange-filter. Red-filters are the only ones you have to correct even using TTL-metering. Give plus one exposure. Please mind: you cannot achieve these filter-effects digitally afterwards!! Because if you scan the film you have already a black and white negative. Digital filters are only working turning a colored picture into black and white. The fun with XP 2 is that you can shoot it at different ISOs, let's say between 100 and 400. Best use it at 200 ISO (if the scene is bright enough) - this gives you the sharpest results, if the sun goes away change ISO to 400 within the same film roll - the results get more grainy. Then give it to the next color-lab (C-41 process) to develop. (In fact it is a color-film that produces black and white pictures.) Have fun!

Q: 6. How long does this film need to be developed in the darkroom?

A: My friend this film behaves pretty much like any other B&W film, and personal preferences upon what final results you may be looking for will determine dark room procedures. Delta 100 has a great and well balanced contrast range. If you are looking normal B&W results, and with standard developers at normal 72-75 degrees ambient temp, I will suggest 10 to 12 minutes, agitating (more like soft shaking..not a bartender kind) 10 seconds at each 2 minutes interval then leave the tank upside down the next 2 minutes and agitate again when you put it up (two min upside down, two min up) and repeat until the 10 to 12 minutes are gone. So, let's say if you did use 10 minutes procedure, you will agitate 5 times total with a 50 seconds (10 sec x 5 times) at each inversion. Remember that more agitation, the more contrast you will get, and the more time means pushing the exposure. I hope this may work for you, let me know.!!!

Q: 7. What is the expiration date on XP2 bulk rolls?

A: As of today's date, 1/9/20, the expiration date is 2/1/22.

Q: 8. How many rolls of film are in a brick of Ilford XP2 Super 400 120B&W? Is there any discount for quantity? Thanks!

A: With this type of film, we purchase it in gross bulk from the manufacturer and sell it per roll. We do not have any brick packs that we sell in this particular instance. Our film is already discounted to the lowest possible price we can offer it to you at regardless of the quantity you purchase.

Q: 9. Is this film available in 120 rolls?

A: Yes it is, see the link below for the 120 format option of this film:http://bhpho.to/1n83Dfu

Q: 10. What's the expiry date if i were to get now?

A: The following item has a expiry date of march 2024. Recorded on 3/18/22

29/09/2024

[Acetate] I used several rolls of this C-41 film with my Canon EOS Rebel K2 and a 24mm f2.8 lens and the images were great. Nice contrast and grain for shots around Los Angeles.

5
16/09/2024

[400] I have created some wonderful works with this film. Everything from studio to snowy landscapes. If you are looking for film in which you can achieve an amazingly sharp/crisp look... buy this one. I highly recommend it.

5
13/09/2024

[C-41] I have used this film since it first was available. I shoot only 35mm (Canon AE-1 Program). I do mostly street photography. This film works great under all lighting conditions. I have it processed ..., scanned to a CD and then I print on my computer. I use an Epson R2880 printer. It does a fantastic job in B&W. Looks as good as what I did years ago in the dark room and I don't have to breath the chemicals. One great film. I shoot only with fast Prime lens.Doug Albert,Houston, Tx.

5
07/09/2024

[125.0 µm] I've been using this film for over a decade, Ilford is still one of the top film manufacturers! Strongly recommended.

5
12/08/2024

[36] No need for specialised labs. C-41 processing makes it so convenient and the look of the photos is amazing

5
07/07/2024

[36] It looks like in the photo, I'm very happy with this purchase!

5
05/07/2024

[125.0 µm] This film can be shot at many ISOs between 50 and 800, and performs best at 400. Generally, photos shot at 50 will tend to have decreased contrast, but lower grain, whereas photos shot at 800 will have increased contrast and grain. I found 200-400 to be the sweet spot with this film.

I shot this film in my Kodak Retina IIIc. The variable ISO range was the best feature as it allowed me to use the film in broad daylight, cloudy weather, and nighttime in a stadium.

5
25/06/2024

[36] For natural light work in the streets or indoors, from very dim to very bright situations, this film handles it all. And the consistent sharpness often surpasses all my expectations. Scans like a dream.

5
19/06/2024

[400] Excellent film - lots of room, great grain. Pretty expensive per roll, but absolutely worth it.

5
12/06/2024

[1] Love this film, easy to find processing locations for a color process C-41, take it to your local pharmacy if you like.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Nanlite Forza 500b Ii Bi-color Led Monolight Kit

$8,280.00 $10,681.20

Tiffen 72mm 82a Light Balancing Filter

$130.71 $167.31

Blackstar Htv-412a Mkii 320w 4x12 Guitar Cabinet

$2,489.97 $3,959.05

Lorex Pro N884a38b 16-channel 4k Uhd Nvr 8tb Hdd

$2,249.97 $3,014.96

Sony Vpl-xw6000es 4k Uhd Laser Projector

$35,994.00 $55,790.70

Istarusa 7" Touchscreen Lcd Black

$894.00 $1,144.32

Elac Debut 2.0 Sub3030 12" 1000w Subwoofer

$2,699.94 $4,157.91

Ricoh 1-month Exchange For Fi-7160

$27.00 $40.23

Digigram Alp222e Pcie Stereo A-d I/o Card

$1,986.00 $2,581.80

Tiffen 95mm 80a Color Conversion Filter

$980.85 $1,549.74