Designed to eliminate the extra step of finishing the screen with trim, the 220V projector screen ceiling hangersfrom projector screen ceiling hangersis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

projector screen ceiling hangersThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 21794EFLSI.

110" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Screen Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. How much weight is able to safely support?

A: The support can hold 4 lbs.

Q: 2. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.

Q: 3. What size are the threads on the end where the camera mounts?

A: Unfortunately, Hikvision does not provide thread information for this mount, it is specifically designed for Hikvision camera connection.

Q: 4. Where do I put the image i want to trace?

A: Hey Joey, I just got an email from B&H asking to help answer your question. We have set ours up and tested it and it seems to work well. There is a opening underneath, where the mirror and light bulb go. Lay your image on your flat surface, and possibly under a small pane of glass to hold it down flat. Position the projector with the opening on the bottom directly on top of your image. I have a 100x equivalent CFL bulb in ours. In a darkened room it should work fine. Also the front tube for focus, the instructions say turn to change focus, but really what you do is slide it out or in depending on the throw length to your canvas or wall you are projecting onto. Hope this helps

Q: 5. Will a standard microphone holder screw onto the threads on this?

A: No you have to tap the end of the pin 5/8-27

Q: 6. Will this attach well to my Velbon tripod's head?

A: The Manfrotto 183 Aluminum Projector Platform will mount to either a standard 3/8 or 1/4 screw. Just be aware of the weight limit of the tripod you use.

Q: 7. Would these be suitable for mounting small (under 10 lbs) height speakers for a Dolby Atmos system? Considering weight and vibration issues.

A: These poles would not be suitable to hold anything other than a small background, where vibration would not be an issue.

Q: 8. Can these be mounted to a 3/4 inch surface with a 9.4 inch hole?

A: Cutout Depth: 4.4" Cutout Size 9.4"

Q: 9. Is this will work with w11000?

A: No it will not. BenQ specifies: Ceiling Mount: 5J.JCY10.001

Q: 10. Does Impact make a version of these Manfrotto Mini Floor-to-Ceiling Pole....

A: Impact offers their Varipole which is a full size support option similar to the Manfrotto Autopole.