Designed to eliminate the extra step of finishing the screen with trim, the 220V projector screen ceiling hangersfrom projector screen ceiling hangersis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

projector screen ceiling hangersThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 21794EBLSI.

110" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Screen Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is this will work with w11000?

A: No it will not. BenQ specifies: Ceiling Mount: 5J.JCY10.001

Q: 2. Will this attach well to my Velbon tripod's head?

A: The Manfrotto 183 Aluminum Projector Platform will mount to either a standard 3/8 or 1/4 screw. Just be aware of the weight limit of the tripod you use.

Q: 3. Are there wider feet available for this product? These are small and not ideal for floors/ceilings that are not perfectly flat.

A: Unfortunately, there are no wider feet available for this product.

Q: 4. BenQ MW 560 How do you advance slide on power point? "Page up" and Page down" don't change page/slide.

A: The BenQ Remote Control for the BenQ MW560 Projector BH #BE5JJND06001 is designed specifically for use with the BenQ MW560 projector. The Pageup/Page down keys control access to the projector's MRNU pages. You would need a presentation remote control or slideshows. Logitech Professional Presenter R800: B&H # LOPPR800: https://bhpho.to/3zfG0jC Key Features: Presenter Mode Built-In Class 2 "Green" Laser Pointer 2.4GHz RF Wireless Technology 100' Range LCD Display with Timer and Indicators Plug-and-Play Technology Ergonomic Design Silent (Vibrating) Alarm

Q: 5. What is the size when folded and placed in the carry bag?

A: The size is approximately 36.0 x 35.0 x 5.0".

Q: 6. How much weight could this hold? I'm considering this for an overhead setup with a friction arm and sony a6000 with kit lens (a pretty light camera)

A: This pole will hold quite a bit of weight, an a6000 would not be a problem.

Q: 7. Where do I put the image i want to trace?

A: Hey Joey, I just got an email from B&H asking to help answer your question. We have set ours up and tested it and it seems to work well. There is a opening underneath, where the mirror and light bulb go. Lay your image on your flat surface, and possibly under a small pane of glass to hold it down flat. Position the projector with the opening on the bottom directly on top of your image. I have a 100x equivalent CFL bulb in ours. In a darkened room it should work fine. Also the front tube for focus, the instructions say turn to change focus, but really what you do is slide it out or in depending on the throw length to your canvas or wall you are projecting onto. Hope this helps

Q: 8. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.

Q: 9. Is there a way to put projector on eco blank mode from remote

A: No, the remote does not have the eco blank button, that button is only found on the projector unit itself.

Q: 10. Does Impact make a version of these Manfrotto Mini Floor-to-Ceiling Pole....

A: Impact offers their Varipole which is a full size support option similar to the Manfrotto Autopole.