Designed to eliminate the extra step of finishing the screen with trim, the 220V ceiling retracting projector screenfrom ceiling retracting projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

ceiling retracting projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24713EBLSI.

113" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Are there extension poles that can be attached to this to hang items lower?

A: You can attach a short c-stand arm or a magic arm with baby receiver. You must always use a safety chain when rigging from the ceiling, so make sure you have a long enough safety chain for the extension.

Q: 2. Is this compatible with Optima W316ST?

A: Depends if you're projector mount has a 1.5 NPT threaded pipe as an attachment. This product is not a projector mount but rather a plate that attaches to the ceiling from which you can attach a standard pipe extension.

Q: 3. can you shorten the stem?

A: This column mount is not adjustable: Dimensions: 4.6 x 19.7" (116.5 x 500 mm)

Q: 4. Where do I put the image i want to trace?

A: Hey Joey, I just got an email from B&H asking to help answer your question. We have set ours up and tested it and it seems to work well. There is a opening underneath, where the mirror and light bulb go. Lay your image on your flat surface, and possibly under a small pane of glass to hold it down flat. Position the projector with the opening on the bottom directly on top of your image. I have a 100x equivalent CFL bulb in ours. In a darkened room it should work fine. Also the front tube for focus, the instructions say turn to change focus, but really what you do is slide it out or in depending on the throw length to your canvas or wall you are projecting onto. Hope this helps

Q: 5. Will this attach well to my Velbon tripod's head?

A: The Manfrotto 183 Aluminum Projector Platform will mount to either a standard 3/8 or 1/4 screw. Just be aware of the weight limit of the tripod you use.

Q: 6. Does this speaker come with a grill cover?

A: The Yamaha NS-IW480CWH In-Ceiling 8" Natural Sound Three-Way Speaker System (Pair) BH #YANSIW480CWH will come with 2 speaker grill covers.

Q: 7. Is there a way to put projector on eco blank mode from remote

A: No, the remote does not have the eco blank button, that button is only found on the projector unit itself.

Q: 8. I understand the, Adjustable Height: column connector extends 5 - 22.7 But in what increments?

A: Starting with the flush mount (without extensions) it's 127.7mm.With the single extension it will be 402.7mm.Adding the adjustable extension you can increment it by 25mm per hole until fully extended to 577.7mm.

Q: 9. This CM00G3 is advertised being for all BenQ Projectors ...I have an SP820,does this mean the CM00G3 would work with the SP820?

A: Yes, this will work with the SP820.

Q: 10. Looking to use these in a small room for holding both backdrops and seamless (seamless no longer than 5') will this support it safely?

A: Yes two of these poles with the appropriate hardware can support seamless paper and backgrounds that are no longer than 5 feet wide.