Designed to eliminate the extra step of finishing the screen with trim, the 220V 6 ft ceiling projector screenfrom 6 ft ceiling projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

6 ft ceiling projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 20857EBLS.

123" Diagonal / 16:10 Aspect Ratio    Dual Vision: Front/Rear Projection    0.9 Gain / 130° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does the Fujifilm FT-XH come with two batteries or do they need to be purchased separately?

A: Although the Fujifilm FT-XH File Transmitter Grip can hold 2 NP-W235 Batteries, they are not included. The FUJIFILM NP-W235 Lithium-Ion Battery (7.2V, 2200mAh), BH # FUNPW235 can be found here: https://bhpho.to/2HYZe2M

Q: 2. Will it work on both X-H2S & X-H2?

A: Yes, the FUJIFILM FT-XH File Transmitter Grip will work with both the FUJIFILM X-H2 and X-H2S Mirrorless Cameras.

Q: 3. Does it really improve wireless tethering speed? How much faster with X-H2s?

A: Yes, not only does the FUJIFILM FT-XH File Transmitter Grip increase transfer speeds to 600 Mb/s, it also allows for wired LAN connectivity increasing the speeds further.

Q: 4. Will this cable work with a Sony Handycam ccd-trv 98?

A: The Pearstone Mini AV to 3 RCA Cable (6 ft) can be used with the Sony CCDTRV98 Hi8 Camcorder for composite video and stereo audio output.

Q: 5. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 6. Will this cable work on Sony ccd trv608 ntsc camcorder?

A: Yes, it will work, although only one of the audio cable may be carrying audio, as the camera's output is mono.

Q: 7. Will this work for a Sony DCR-TRV 280?

A: This will work only as a way to view on an RCA TV.

Q: 8. Does this cord possibly work with an android phone?

A: Unfortunately no. The Pearstone Mini AV to 3 RCA Cable (6 ft) will not work for phones.

Q: 9. How works doing tethering with Capture One or Lightroom sending RAW files?

A: Tethered support with the FUJIFILM FT-XH File Transmitter Grip is going to be limited. Adobe Lightroom does not support tethered shooting with any Fujifilm cameras, only immediate import once shot. Capture One Pro 22 does not currently support wireless tethering with any Fujifilm cameras, it would be only wired support.

Q: 10. Can this be used on older DP3M?

A: Thank you for your interest in Sigma products. The Conversion Lens FT-1201 is only compatible with the DP3 Quattro. It is not compatible with the DP3 Merrill.