The projection screen and projector rentalfrom projection screen and projector rentalis designed for versatility and durability in rental and staging environments. The frame bolts together with Speedy Cranks for efficient set up and tear down without tools. Front and rear projection surfaces can be interchanged, and adjusted up or down in six inch increments.

projection screen and projector rentalThis screen requires legs, which are available separately. Additionally, no case is included.

20.6' Diagonal / 16:9 Aspect Ratio    Da-Tex Surface    1.3 / 60° Viewing Angle    Rear Projection    Welded 1" Aluminum / 6 x 1" Truss Frames    No Case/Legs

Da-Tex is a vinyl, gray, rear projection surface that works well in high ambient light with a reduced viewing angle. It offers high transmission and low reflective values for optimal viewing. It also yields high color rendition and image contrast. Cone: 60° Gain: 1.3

• Folding 6" truss frames
• Welded 1" aluminum tubing forms 6 x 1" truss frame
• Separately available Drapery Presentation Kit for professional stage-front aesthetic

Related Questions and Answers

Q: 1. is this 16:9?

A: The aspect ratio of the screen is 1.85:1.

Q: 2. What track do I need to go with this, and how does the track attach to stands?

A: This system uses piping with a outside diameter between 1.5 to 1.9 . The kit includes the track ends and middle support to connect the system to stands like B&H # MASSLIDER. For assistance locating the proper track for this system feel free to email us at ask@bandh.com.https://bhpho.to/2IXDfai

Q: 3. Can I use this item with Kessler Crane K-Flex Dolly Track?

A: The Dutti Dolly wheels will track on the Kessler K-Flex system.

Q: 4. What is the width of the track from the center of each pole support?

A: You can order the pipe in any length you want...after 7' you will need support...go to the Dana dolly site they provide you supplier info.

Q: 5. Can this be used with an Sachtler Aktiv8 75mm fluid head in the under slung configuration?

A: We have not had the ability to test this set up ourselves therefore we are hesitant to recommend the Aktiv8 in an underslung position. The quick release mechanism that enables the Aktiv8 head to quickly mount/dismount has not been tested or rated for inverted scenarios. We recommend using a conventional 75mm head ( such as the FSB8) if you plan to use it in an inverted position.

Q: 6. will the ends fit over an avenger c stand 5/8 baby pin?

A: If the pin is the standard length of a normal pin, you should be fine.

Q: 7. Where is the Dutti Dolly low profile tie down that video says comes with?

A: You can search the Low Profile Tie Down on msegrip.com as part number: 1062-3

Q: 8. If I get pipe at the local hardware store am I looking for steel? Galvanized? Does it matter?

A: I would stay away from steel just because of the weight. Nobody wants to lug all those pounds around. Standard speedrail is 1 1/4 schedule 40 aluminum (6061). 5 foot lengths are solid. 10 foot lengths bow slightly in the center, especially with heavier rigs. Its never a problem if you use the track center support that comes with your kit.

Q: 9. How low can the bottom of the viewable screen be from the floor level?

A: About 8" off the floor is the lowest height setting.

Q: 10. is 8'2" X 13'11" the actual screen size, not including the frame? Or is it 8'2" wide and 13'11" tall fully assembled?

A: Overall Size 8'2" x 13'11" (2.5 x 4.3 m)