Designed to eliminate the extra step of finishing the screen with trim, the 120V rear ceiling projector screenfrom rear ceiling projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

rear ceiling projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24709FL.

159" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. How would I attach my own filter to this? Is that what this is for?

A: The DZOFilm Magnetic Base for Koop Rear Filter is a spare ring that works only with the DZOFilm Koop Rear Filter Kit for Vespid / Catta Ace PL-Mount Lenses.

Q: 2. How low can the bottom of the viewable screen be from the floor level?

A: About 8" off the floor is the lowest height setting.

Q: 3. Does this fit Sigma 24mm 1:1.4 DG filter lens 77?

A: Yes, the LCR II Rear Lens cap for Nikon F will fit the Sigma 24mm f/1.4 DG lens for Nikon.

Q: 4. Are these shims compatible with pictor lenses?

A: Shims ship with each DZO Pictor lens. The DZOFilm Shim set is for Vespid and Catta Ace Lenses and works with Koop Rear Lens Filters.

Q: 5. Will this work with a Furman F1000-UPS?

A: Furman includes the rack ears for use in a standard 19 rack. These rack ears are not compatible. Please contact Furman directly for the correct OEM rack ears: Tel: 877-486-4738 or 707-763-1010Email: a href= http://info@furmansound.com target= _blank info@furmansound.com/aWebsite: a href= http://www.furmansound.com/ target= _blank http://www.furmansound.com//a

Q: 6. The photo shows the filter with a magnetic base. Is the magnetic base included? In photo but not listed in description.

A: DZOFilm Koop Rear UV Filter BH #DZOKFUVSGL doesn't come with a magnetic base. There is a separately available Koop magnetic base.

Q: 7. Will this cap fit the rear of the Metabones Canon to E-mount adapter?

A: The Sony brand rear lens cap fits tighter than the Metabones supplied e-mount rear lens cap, which falls off it is so loose.

Q: 8. Does it fit Sigma 17-70mm F2.8-4 DC Macro HSM OS Lens?

A: Yes

Q: 9. Has anyone had experience front operating the jonyjib jr? I need a short jib to use with my fluid head now, but i like the expandability of the jonyjib. My concern is that if I mount my fluid head to the camera platform, then perform a jib up maneuver, the camera will tilt toward the fulcrum instead of going straight up. If anyone can share experience of this type, I would greatly appreciate it.

A: When raising the front of the JonyJib Jr, with a fluid heads pan arm, this problem would only exist with really lightweight cameras: I.e. if you raised the camera too quickly the leveling cable could get slack and tilt the camera instead of just raising the arm. If you have a heavier camera this is not an issue. It can be mitigated, for lighter cameras (5 lbs or less), by adding some weight to the camera platform.

Q: 10. How many shims in a set? What are the thicknesses of the shims?

A: There are 8pcs shims in the DZOFilm Shim Set for Koop Rear Filters And the thickness is, Koop shims set (0.5mm*1，0.3mm*1，0.1mm*3，0.05mm*1，0.03mm*1，0.02mm*1）