Designed to eliminate the extra step of finishing the screen with trim, the 120V rear ceiling projector screenfrom rear ceiling projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

rear ceiling projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24710FL.

184" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. How many shims in a set? What are the thicknesses of the shims?

A: There are 8pcs shims in the DZOFilm Shim Set for Koop Rear Filters And the thickness is, Koop shims set (0.5mm*1，0.3mm*1，0.1mm*3，0.05mm*1，0.03mm*1，0.02mm*1）

Q: 2. Does this fit Sigma 24mm 1:1.4 DG filter lens 77?

A: Yes, the LCR II Rear Lens cap for Nikon F will fit the Sigma 24mm f/1.4 DG lens for Nikon.

Q: 3. I saw recommended shims after I use the black mist filter. Is that mean I have to remove the shims everytime I remove the use of filter to achieve the infinity focus? I guess it destroy the whole concept of quickly swift between filter? Or you can still archive infinity focus but just the focus mark will be off a bit?

A: If using the DZOFilm Shim Set for Koop Rear Filters, you would have to remove the shims when removing the filter.

Q: 4. The photo shows the filter with a magnetic base. Is the magnetic base included? In photo but not listed in description.

A: DZOFilm Koop Rear UV Filter BH #DZOKFUVSGL doesn't come with a magnetic base. There is a separately available Koop magnetic base.

Q: 5. is this 16:9?

A: The aspect ratio of the screen is 1.85:1.

Q: 6. How low can the bottom of the viewable screen be from the floor level?

A: About 8" off the floor is the lowest height setting.

Q: 7. Will this work with a Furman F1000-UPS?

A: Furman includes the rack ears for use in a standard 19 rack. These rack ears are not compatible. Please contact Furman directly for the correct OEM rack ears: Tel: 877-486-4738 or 707-763-1010Email: a href= http://info@furmansound.com target= _blank info@furmansound.com/aWebsite: a href= http://www.furmansound.com/ target= _blank http://www.furmansound.com//a

Q: 8. Is for Batis line? like original?

A: The ZEISS Rear Lens Cap for Loxia E-Mount Lenses will work as a back / rear lens cap for most E mount lenses.

Q: 9. Does this fit a 150-600 sigma lens with canon mount?

A: The Sigma LCR II Rear Lens Cap for Sigma SA is incompatible with the Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens for Canon EF. The Sigma LCR II Rear Lens Cap for Canon EF, BH #SILCREOII, is compatible.

Q: 10. is 8'2" X 13'11" the actual screen size, not including the frame? Or is it 8'2" wide and 13'11" tall fully assembled?

A: Overall Size 8'2" x 13'11" (2.5 x 4.3 m)