Designed to eliminate the extra step of finishing the screen with trim, the 120V projector screen mounted to ceilingfrom projector screen mounted to ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

projector screen mounted to ceilingThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24708BLS.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. is it compatilble whith mk7 technicks?

A: Yes see it is on list of recommended cartridges for the Mk 7 https://www.bhphotovideo.com/c/product/1457574-REG/technics_sl_1200mk7_direct_drive_turntable_system.html/accessories

Q: 2. will this carage fit the Bang & Olusen RX2 ?

A: I'm sorry but no this cartridge will not fit your B&O. B&O's used a unique proprietary plug in cartridge that are longer made. This was IMO the down fall of B&O turntables which were otherwise nice turntables with low mass arms (especially the cool linear trackers). If you can find a NOS one even one of the lower end models snatch it up but be prepare to pay a pretty penny.

Q: 3. Can I use a double-ended spigot to put a Teradek bolt above and a small cigar mic below?

A: You should be able to use one double-sided spigot on top for the Teradek Bolt and one on the bottom for the mic. The total weight of the gear would not exceed the arm's 12 lb. maximum capacity.

Q: 4. can a ring light be attached to this mount?

A: If your ring light has the standard 5/8" light stand receptacle on the bottom of the light fixture, then yes, it would be able to connect to the Impact 7 ft HD Wall-Mounted Boom Arm. If the ring light you own does not have a 5/8" receptacle, then you would need an adapter that converts the standard 5/8" baby stud on the boom arm to the connection used by your ring light.

Q: 5. Does this come with a filter pouch?

A: Yes it does come with a pouch.

Q: 6. Can this be used for 70 V systems?

A: The Atlas Sound AT100-RM Rack Mounted 100W Attenuator will work with a 70v signal and a 70v signal only. It should not be attempted to be used with 8Ω equipment.

Q: 7. Would I be able to use this for the Aputure LS1S Light?

A: You can use this with a Ls1s.

Q: 8. Is it not advisable to mount this outdoors?

A: The Impact 7' HD Wall-Mounted Boom Arm can be mounted outside but it is not designed for that purpose. This product is not weather resistant.

Q: 9. 29inches?

A: The dimensions of this attenuator are:Dimensions (HxWxD) 2.75 x 1.7 x 2.5 (6.985 x 4.445 x 6.35 cm)

Q: 10. Can I connect 2 of these speakers to a computer?

A: These speakers require a Supply Voltage of 24 V DC and would not be suitable for direct connection to a computer.