Designed to eliminate the extra step of finishing the screen with trim, the 120V projector screen mounted to ceilingfrom projector screen mounted to ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

projector screen mounted to ceilingThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24715BLS.

130" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can you mount a camera to the end for overhead shots?

A: Yes, I would recommend attaching a ball head first for optimal movement.

Q: 2. is it compatilble whith mk7 technicks?

A: Yes see it is on list of recommended cartridges for the Mk 7 https://www.bhphotovideo.com/c/product/1457574-REG/technics_sl_1200mk7_direct_drive_turntable_system.html/accessories

Q: 3. Can this be used for 70 V systems?

A: The Atlas Sound AT100-RM Rack Mounted 100W Attenuator will work with a 70v signal and a 70v signal only. It should not be attempted to be used with 8Ω equipment.

Q: 4. How large is the mounting plate to the wall?

A: The wall plate is 3.2". x 6.0"

Q: 5. Can I connect 2 of these speakers to a computer?

A: These speakers require a Supply Voltage of 24 V DC and would not be suitable for direct connection to a computer.

Q: 6. What is the weight limit that can be mounted to this?

A: The manufacturer has not provided a specification for the load capacity of the Godox VSM-B01 Desk-Mounted Boom Arm, but it can safely support most large diaphragm microphones with a shockmount and pop filter attached.

Q: 7. will this work on the 135i scanner?

A: Yes, the Plustek 35mm Mounted Slides Holder works with the Plustek OpticFilm 135i Film Scanner.

Q: 8. what is length of boom arm fully retracted? thanx...

A: The Impact 7' HD Wall-Mounted Boom Arm at the smallest is 3.9 feet.

Q: 9. Can the boom are be swiveled/panned flush against the wall or not? I see conflicting responses. Some say yes, others say no. One reviewer stated that he 'wished it would pivot 180 degrees'. Specifically, with nothing mounted to the end of the boom, can the boom arm pivot on the mounting bracket so that the spigot end goes all the way to the wall? Or does the design of the mounting bracket/pivot bolts prevent it from rotating that far?

A: Yes. When fully extended the boom arm offers the flexibility of 180° of tilt and 170° of pan movement. Length is adjustable via a locking ratchet handle, and a locking knob on the support tube provides for extra reinforcement for your payload.

Q: 10. Is it not advisable to mount this outdoors?

A: The Impact 7' HD Wall-Mounted Boom Arm can be mounted outside but it is not designed for that purpose. This product is not weather resistant.