Designed to eliminate the extra step of finishing the screen with trim, the 120V projector screen mounted to ceilingfrom projector screen mounted to ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

projector screen mounted to ceilingThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24716BLS.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is it not advisable to mount this outdoors?

A: The Impact 7' HD Wall-Mounted Boom Arm can be mounted outside but it is not designed for that purpose. This product is not weather resistant.

Q: 2. Is it compatible with a Yamaha P 350?

A: Yes, the Ortofon Omega Elliptical Headshell Mounted Cartridge with Stylus is compatible for use with the Yamaha P-350 Turntable.

Q: 3. What is the depth of the shelf?

A: The depth of the shelf is 15.75". Actual dimensions of the shelf are 19 (width) x 15.75 (depth) x 1.75" (height). The shelf can slide out from a rack like a drawer and then be pushed back flush into the rack. The sliding track allows the entire shelf to pull out so it extends up to 13.8" from the rack.

Q: 4. I searched for "break-out boxes," but was hoping to find something that would facilitate 'monitoring' the charging voltage to a cell phone. Does anyone know of a better search criteria to 'dredge up' such an item?

A: The dBx BOB is a system specific product for dbx Drive Rack. Monitoring of charging voltage to a cell phone is generally less important than monitoring the current.

Q: 5. Does this fold downward to be flat against the wall? (Not side to side)

A: The Impact 7 ft HD Wall-Mounted Boom Arm to be flat on on the wall is side to side. Not up or down.

Q: 6. will this work on the 135i scanner?

A: Yes, the Plustek 35mm Mounted Slides Holder works with the Plustek OpticFilm 135i Film Scanner.

Q: 7. Can the boom arm be locked in a specific panning position?

A: Yes it can be locked in a specific panning position.

Q: 8. Can this bracket be mounted on just one stud in the wall? Using two or four screws through the center holes?

A: I mounted it into a stud with two screws on one side , and used heavy-duty anchors through the two screw holes on the opposite side. I think you need to use the four screw holes, because it is quite heavy once you have a light attached. Having four points of anchor will give it more stability in the long run. This is an awesome product, and well worth the time to install correctly.

Q: 9. What is the weight limit that can be mounted to this?

A: The manufacturer has not provided a specification for the load capacity of the Godox VSM-B01 Desk-Mounted Boom Arm, but it can safely support most large diaphragm microphones with a shockmount and pop filter attached.

Q: 10. Is the mounting depth adjustable?

A: The ER-SS1U comes with optional adjustable four post mounting ears which will adjust between 17.5 to 20.