Designed to eliminate the extra step of finishing the screen with trim, the 120V manual ceiling projector screenfrom manual ceiling projector screenis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

manual ceiling projector screenThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24710BLI.

184" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Video Projector Interface    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Olympus OM-D E-M5?

A: The Neewer TT560 manual flash is compatible with any camera that has a standard hot shoe such as the Olympus OM-D E-M5. Since it is a manual flash, you will need to set the camera to manual exposure mode.

Q: 2. This flash has a charging socket what is its use, and where can I find the cord?

A: The unit offers no charging port but 1x External power pack 1x 3.5mm mini phone jack for an external slave system

Q: 3. Will it work with a Nikon D3400?

A: Yes, Bolt VD-420 Wireless Manual Flash is a universal unit. You can use it on or off the camera hot shoe. Please be aware there is no TTL service, the flash exposure must be set manually.

Q: 4. What is the external power connector type?

A: This flash takes a Canon type connector for a battery pack.

Q: 5. Can you control the power on slave mode?

A: Yes.

Q: 6. Will it work with Lumix S5 or S1H?

A: The Bolt VD-420 Wireless Manual Flash is compatible with the Panasonic Lumix S1 Mirrorless Camera and the Panasonic Lumix S1H Mirrorless Camera.

Q: 7. Can this flash(or 2) be used remotely off of hot shoe with a Canon sl2 for a wildlife camera trap?

A: Yes, you can fire this flash optically from another flash on camera, however using radio signals to fire the flash is much better for use when triggering outdoors.

Q: 8. Does the wireless transmitter require batteries? if so what size?

A: Bolt VD-420 Wireless transmitter uses an included (23 A 12V) alkaline battery thats replaceble. The battery last about 2 years.

Q: 9. Does this flash have an optical eye for slave function? Or can I use it with my old Pocket Wizards?

A: The Bolt VD-420 Wireless Manual Flash has a radio receiver built-in, and an optical slave mode.

Q: 10. Does it work on a canon t100 ??

A: No, the Bolt VD-420 Wireless Manual Flash cannot be used with the Canon EOS Rebel T100 DSLR Camera as that camera lacks a center firing pin in the hotshoe.