The mahogany Dual 15L Workstation Desk with Two DR800 8 Upper RU from Argosy is designed with an 8 RU angled top to avoid reflections from speakers. It supports a full-size keyboard controller at your fingertips and accommodates two 27” monitors. The chassis design defeats thermal buildup and permits easy cable access. Its steel legs support 19 to 32mm powder-coated MDF components to support your studio equipment. An enclosed utility area separates, conceals, and protects vital gear and cabling.

Designed with two 15° angles for a wrap-around feel

Lowered rear-monitor platform

Padded armrest

Powder-coated steel legs

Integrated rack modules

Internal cable trunking for wire management

Related Questions and Answers

Q: 1. Will this work with two ASUS VE247H 23.6 Full HD 1920x1080 2ms HDMI DVI VGA Back-lit LED Monitors? I've never mounted a monitor before, and I see there is a plate, how do I know what it will fit?

A: Not all monitors are mountable . The ones that are have a clear noticeable 4 holes on the back of the monitor which are standard for any mount. The mount is screwed onto the back of the monitor via these 4 holes. Non-mountable monitors have a clean back with no holes and need to be used with a stand. This particular mount will attach to any mountable monitor. Your investigation should be whether or not these Asus monitors are indeed mountable . Hope this helps.

Q: 2. What's load capacity per arm?

A: The Mount-It! Dual Monitor Desk Mount with Mechanical Springs BH #MOMI2672 has a weight capacity of 17.6 lbs. per arm

Q: 3. Can it be configured to have only one arm attached to the base?

A: Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black) BH #MOMI1772B • MFR #MI-1772B is designed for both arms to be connected and operational.

Q: 4. What is the length/height from the table to the middle of the VESA mount? Is that what the "max arm extension length" covers in the specs?

A: Please contact the manufacturer directly for this unpublished specification: Mount-It!: Tel: (855) 925-5668

Q: 5. I am building a custom desk and want to know how much clearance I should leave in the back in order to use this mount. Would two inches be enough? I Plan to have a crossbar run along the back of the desk but I want to have it be far enough into the desk for this to fit

A: I agree with Dany D. below, 3/4 is enough, 1 to be safe.

Q: 6. What is the maximum size of the clamp?

A: You have the option to use the clamp or grommet connection to connect it to your desk (0.4 to 3.54 in thickness).

Q: 7. If I mount 2 32" monitors, how high off the desk can I raise the monitors? How much space will be under the monitors?

A: The monitor width would be an important measurement to know to determine installed measurements relative to the desk. With this mount (Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black)BH #MOMI1772B ), figure no more than a 6 to 7"" clearance with the mount at its highest 13" adjustment.

Q: 8. Can this be mounted on a glass desk?

A: The K&M 23875 Dual Monitor Desk Mount BH #KMDVMDMB could be mounted to a fully-tempered, impact resistant glass desk

Q: 9. Can you please send me the dimensions for this desk? -- Or the specs?

A: The dimensions for the On-Stage WS7700b are as follows: Dimensions: 56" (L) x 32" (D) x 38" (H) Keyboard Tray Dimensions: 27" x 15" Main Work Surface Overall Dimensions: 56" (L) x 26" (D) Main Work Surface Usable Dimensions: 56" (L) x 17" (D) Upper Work Surface Dimensions: 53" (L) x 17" (D) Computer Holder Dimensions: 9.25" (L) x 12" (D) x 28" (H) Total Rack Space: 6U Shallow (3U left + 3U right) Rack Width: 19" Rack Depth: 9.5" Weight Capacity: 175 lb Construction: MDF & Steel Color: Black

Q: 10. Can this ergotron workfit-s dual monitor sit'-stand workstation can be clamped to a desk? What size of monitors can we use?

A: I have a single monitor set up like this, it can be clamped to a desk , at the bottom , highly recommend, single monitor is very easy to operate , dual panel might be heavier to move up and down due to the added second monitor weight