Designed to eliminate the extra step of finishing the screen with trim, the 220V installing a projector screen in the ceilingfrom installing a projector screen in the ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

installing a projector screen in the ceilingThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24710EFL.

184" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. can you shorten the stem?

A: This column mount is not adjustable: Dimensions: 4.6 x 19.7" (116.5 x 500 mm)

Q: 2. Is this will work with MH741?

A: Yes it will

Q: 3. Looking to use these in a small room for holding both backdrops and seamless (seamless no longer than 5') will this support it safely?

A: Yes two of these poles with the appropriate hardware can support seamless paper and backgrounds that are no longer than 5 feet wide.

Q: 4. BenQ MW 560 How do you advance slide on power point? "Page up" and Page down" don't change page/slide.

A: The BenQ Remote Control for the BenQ MW560 Projector BH #BE5JJND06001 is designed specifically for use with the BenQ MW560 projector. The Pageup/Page down keys control access to the projector's MRNU pages. You would need a presentation remote control or slideshows. Logitech Professional Presenter R800: B&H # LOPPR800: https://bhpho.to/3zfG0jC Key Features: Presenter Mode Built-In Class 2 "Green" Laser Pointer 2.4GHz RF Wireless Technology 100' Range LCD Display with Timer and Indicators Plug-and-Play Technology Ergonomic Design Silent (Vibrating) Alarm

Q: 5. Can these be mounted to a 3/4 inch surface with a 9.4 inch hole?

A: Cutout Depth: 4.4" Cutout Size 9.4"

Q: 6. This mount comes with 2 attachments. One is obviously the scissor mount for use with a drop ceiling, but what is the other accessory for?

A: From the manufacturer. I checked into this and was told that there is a loop on the safety cable that goes over the scissor mount stud. The safety cable is then secured to the stud by the item on the left.

Q: 7. Is this compatible with Optima W316ST?

A: Depends if you're projector mount has a 1.5 NPT threaded pipe as an attachment. This product is not a projector mount but rather a plate that attaches to the ceiling from which you can attach a standard pipe extension.

Q: 8. This CM00G3 is advertised being for all BenQ Projectors ...I have an SP820,does this mean the CM00G3 would work with the SP820?

A: Yes, this will work with the SP820.

Q: 9. This mount comes with 2 attachments. One is obviously the scissor mount for use with a drop ceiling, but what is the other accessory for? Here's a photo - it's the item on the left.http://creativeillusions.biz/mount.jpg

A: From the manufacturer I checked into this and was told that there is a loop on the safety cable that goes over the scissor mount stud. The safety cable is then secured to the stud by the item on the left.

Q: 10. Is this an OEM lamp?

A: Yes this a genuine Epson product.