Designed to eliminate the extra step of finishing the screen with trim, the 220V installing a projector screen in the ceilingfrom installing a projector screen in the ceilingis designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

installing a projector screen in the ceilingThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24718EFLI.

189" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Video Projector Interface    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Does Impact make a version of these Manfrotto Mini Floor-to-Ceiling Pole....

A: Impact offers their Varipole which is a full size support option similar to the Manfrotto Autopole.

Q: 2. Can the pin be removed and have just threading off the scissor clip?

A: Yes, you may unscrew the pin on the Avenger C1000 to expose the threading.

Q: 3. Can use for LPR camera model 277? I need about 60cm long.

A: The Hikvision CPM-L Ceiling Pole Mount (Long) BH #HICPML mounts to specific Hikvision pendant caps and not directly to cameras.

Q: 4. Assembly instructions?

A: Put the rubber feet on the ends of the pole. Done.

Q: 5. It does appear so, but can the platform be removed from the stand and mounted to a different one, say a light stand?

A: The tray on the Gator Tripod Laptop and Projector Stand, (B&H # GALPTOP1500), can be removed but it is only meant to be used with the included stand. If you want to use a light stand, I recommend looking at a product like the Proaim Universal Laptop Workstation for C-Stands, (B&H # PRWS03).

Q: 6. How much weight is able to safely support?

A: The support can hold 4 lbs.

Q: 7. Is this an OEM lamp?

A: Yes this a genuine Epson product.

Q: 8. Do I need any mounting brackets?

A: No

Q: 9. I have installed this mount, but it seems to slowly tilt (a few degrees) to one side in a few days. Any ideas to keep it stable?

A: Be sure thaty all of the fittings and screws are tightened on the BenQ CM00G3 Ceiling Mount for Select BenQ Projectors. (BH # BECM00G3) Avoid using wall/ceiling anchors if at all possible.

Q: 10. Is this will work with w11000?

A: No it will not. BenQ specifies: Ceiling Mount: 5J.JCY10.001