You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Arri Skypanel X Price

Arri Skypanel X Price
  • Product Code: eq29769
  • Availability: In Stock

$11,790.00 $17,331.30

arri skypanel x pricecontinues to broaden its LED line and reaffirm their commitment to accurate color rendering with the introduction of the blue/silver SkyPanel S30-C LED Softlight. Supported by a pole operated aluminum yoke, the panel's surface area measures 14 x 11.8", making it an ideal portable, on-the-go light source for mobile applications. Output is controlled via interchangeable thermoplastic diffusers that range from Standard to Lite to Heavy to soften the light and wrap its output around your subject and the SkyPanel S30-C outputs the equivalent of a 1000W tungsten soft light while drawing a maximum of only 240W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S30-C is fully color "tuneable" allowing output of a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full minusgreen to full plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 91 with the newer TLCI standard. All of these functions as well as 0-100% dimming can adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, Windows or Mac.

The SkyPanel S30-C can be used worldwide, thanks to its included 90-250 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a combo baby/junior (5/8" | 1-1/8") pin and a standard diffuser. This version of the light comes with a 3.3'-long bare ends DC power cable.

Pole Operated Yoke    Panel Surface Area: 14 x 11.8"    110° Beam Spread    Color Temperature from 2800-10,000K    Full Gamut Color Mixing    Hue and Saturation Control    Full Minus to Full Plusgreen    0-100% Dimming, DMX Control    CRI: >95, TLCI: >91    Multi-Voltage AC, Optional Battery Power

Key Specs
Item Type1x LED Light Panel
Included Storage CaseNo
Photometrics3200K:
513 fc / 5526 Lux at 3.3' / 1 m*
57 fc / 614 Lux at 9.8' / 3 m
21 fc / 221 Lux at 16.4' / 5 m
5600K:
502 fc / 5409 Lux at 3.3' / 1 m*
56 fc / 601 Lux at 9.8' / 3 m
20 fc / 216 Lux at 16.4' / 5 m

*Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature2800 to 10,000K +/- 100K (with 200K Shift over Lifetime)
Color ModesRGB, Daylight, Tungsten
Color Accuracy StandardCRI 95
TLCI 91
DimmingBuilt-In Dimmer (Continuous)
 • 0 to 100%
Front Accessory MountProprietary
Wireless Remote Control TypeWireless DMX *Adapter Required (Not Included)
Power SourceAC Power (Cable Included)
Battery (Not Included)
Battery Plate Type2x V-Mount (Not Included)
2x Gold Mount (Not Included)
Battery2x Rechargeable, 23 to 36 VDC (Not Included)
Input Power110 to 250 VAC, 50 / 60 Hz
48 VDC
23 to 36 VDC
Power Consumption220 W
Fixture Mounting1x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount)
Light Fixture
Item Type1x LED Light Panel
Included FiltersDiffusion
Included Storage CaseNo
Photometrics3200K:
513 fc / 5526 Lux at 3.3' / 1 m*
57 fc / 614 Lux at 9.8' / 3 m
21 fc / 221 Lux at 16.4' / 5 m
5600K:
502 fc / 5409 Lux at 3.3' / 1 m*
56 fc / 601 Lux at 9.8' / 3 m
20 fc / 216 Lux at 16.4' / 5 m

*Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature2800 to 10,000K +/- 100K (with 200K Shift over Lifetime)
Color ModesRGB, Daylight, Tungsten
Color Accuracy StandardCRI 95
TLCI 91
DimmingBuilt-In Dimmer (Continuous)
 • 0 to 100%
Expected Lamp Life50,000 Hours (L70)
Beam Angle110°
Built-In FlashNo
Umbrella MountNo
Front Accessory MountProprietary
Wireless Remote Control TypeWireless DMX *Adapter Required (Not Included)
Mobile App CompatibleNo
Power & I/O
Power SourceAC Power (Cable Included)
Battery (Not Included)
Inputs/OutputsLight Fixture
1x XLR 5-Pin DMX Input
1x XLR 5-Pin DMX Output
1x etherCON/RJ45 DMX Input
1x USB-A Service/Remote Input
1x XLR 3-Pin Power Input (48 VDC)
1x XLR 4-Pin Battery Input (23 to 36 VDC)
Power Supply/Controller
1x powerCON TRUE1 Power Input
1x powerCON TRUE1 Power Output
1x XLR 3-Pin Power Output (48 VDC)
Battery Plate Type2x V-Mount (Not Included)
2x Gold Mount (Not Included)
Battery2x Rechargeable, 23 to 36 VDC (Not Included)
Input Power110 to 250 VAC, 50 / 60 Hz
48 VDC
23 to 36 VDC
Included Adapter / Cable1x Bare Ends to powerCON TRUE1 Cable
Inline SwitchNo
Power Pass-ThruYes
Power Consumption220 W
Mounting
Yoke TypePole-Operated Yoke (180° Tilt)
Fixture Mounting1x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount)
Environmental
Environmental ResistanceDust-Resistant (IP20)
Operating Temperature-4 to 113°F / -20 to 45°C
General
DisplayNo
CertificationsCE, CB, ENEC, cNRTLus, FCC, PSE
Dimensions15 x 4.6 x 3.5" / 38.3 x 11.6 x 9 cm (Power Supply/Controller)
15.6 x 13.5 x 5.2" / 39.7 x 34.2 x 13.3 cm
22 x 20 x 5.2" / 55.9 x 50.7 x 13.3 cm (Fixture with Yoke)
14 x 11.8" / 35.5 x 30 cm (Fixture Panel)
Weight19.4 lb / 8.8 kg (Fixture with Yoke)
5.5 lb / 2.5 kg (Power Supply/Controller)
Packaging Info
Package Weight34.2 lb
Box Dimensions (LxWxH)26 x 18 x 12"

Incorporating features of ARRI's successful L-Series LED Fresnels, the SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel "C" (Color) versions are fully tunable, meaning that correlated color temperature is adjustable between 2800K and 10,000K, with accurate color rendition over the entire range. Full plus and minusgreen correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible. Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the chroma green output for green screen color keying. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate color temperatures.

Soft lights are known for their smooth quality of light and even, uniform beam field. SkyPanel's combination of a precise selection of diffusion panels, LED mixing chamber, and large surface area allows for the light output to wrap around objects, eliminating sharp shadows and making for an ideal beauty light. The beam field is homogeneous in both color and intensity.

Mixing calibrated red, green, blue, and white LEDs into one homogeneous beam of soft light, the SkyPanel produces not just impressive light quality, but excellent shadow rendering as well. The soft shadows cut cleanly without exhibiting multiple edges or color fringing.

  • While the SkyPanel was designed to be used primarily as a soft light to illuminate people, various built-in features make it extremely adaptable to other uses. The diffuser panels on the front of the lamp head are interchangeable, so going from the Heavy to the Lite diffusion panel can be done in a matter of seconds.
  • With the onboard battery input, SkyPanel can be run off industry-standard batteries. The S30 can be operated at full power on battery power.
  • The SkyPanel also makes an effective space light outputting a large downward-directed pool of color-controllable soft light through an optional silk cylinder.

Made in Germany to the high standards for which all ARRI products are known, SkyPanel is constructed from resilient materials and assembled by hand with great care. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets. The electronics have been designed to last beyond a minimum of 25,000, up to a maximum of 50,000 hours while the LED light engine even allows for re-calibration.

The SkyPanel user interface is designed for ease of use with a wide range of controls available to the user. Three simple knobs adjust the color temperature, green/magenta balance, light intensity, and hue and saturation instantly. In addition to the onboard controls, all functions can be remotely adjusted via DMX or LAN connections.

At 16.4' and 3200K:

  • With Standard Diffusion: 217 lux / 20 fc
  • With Lite Diffusion: 235 lux / 22 fc
  • With Heavy Diffusion: 180 lux / 17 fc
  • With Intensifier: 282 lux / 26 fc
At 16.4' and 5600K:
  • With Standard Diffusion: 222 lux / 21 fc
  • With Lite Diffusion: 240 lux / 22 fc
  • With Heavy Diffusion: 185 lux / 17 fc
  • With Intensifier: 289 lux / 27 fc

Related Questions and Answers

Q: 1. Will this work with the barn doors?

A: Unfortunately, only one or the other can be used on the S60C.

Q: 2. Would this fit the Zolar Vega 30c with it's ballast?

A: The Zolar Vega 30c will fit the Tenba Car Case for ARRI S30 SkyPanel BH #TECCL30.

Q: 3. does this come with mounting frame?

A: Yes, the frame is included with this softbox.

Q: 4. What are the dimensions of the face of the softbox?

A: According to the manufacturer, the front measurement of the softbox is 24 x 35 inches.

Q: 5. Should the Skypanel’s diffusion panels be taken out and not used while this softbox is being used or does it not matter?

A: I would leave the diffusion in place.

Q: 6. Is this compatible with a Luxli taiko?

A: This Chimera Octa 5 cannot work with the Luxli Taiko. What you can use is the TRP WORLDWIDE RABBIT-EARS Rectangular, BH # TRSRER and the TRP WORLDWIDE OCTA 5 Snapbag for Rabbit Ears Frame Mount (5' Diameter), BH # TRSBRO5 instead. https://bhpho.to/3rS3VTZ https://bhpho.to/3otyVZ3

Q: 7. shows no characters the device does not work? bright yellow LEDs!

A: The SkyPanel should automatically recognize the remote the control, but only if you're using firmware 2.5 or later for the SkyPanel itself. Please also make sure to try a different USB cable if nothing is showing on the display.

Q: 8. Will this case fit the Lupo Superpanel 60?

A: This case would be too small for a Lupo Superpanel 60. They do offer the Lupo Padded Bag for Superpanel 60 and Accessories (Black), BH # LU434 https://bhpho.to/2XnTeuA

Q: 9. Would this case fit the Aputure Nova p300C?

A: This case is not compatible with the Aputure Nova P300C. However, that panel comes with its own rolling hard case.

Q: 10. Can this case fit the Aputure Nova P600c?

A: Unfortunately, this Tenba Car Case is only for the Arri S60 Skypanel.

17/08/2024

[26 x 18 x 12"] I’m using this as a soft Steadicam bag for the truck and/or set. Also for quick moves in fading light as a soft and protective in-can travel case.
Works very well. Fits my entire Steadicam sled plus backup cables etc...
Highly recommend.

5
07/08/2024

[Yes] I bought it for my Litepanels 2x1. It fits, and there's plenty of space left. But I wish there was something meant specifically for this light, as you can't really fit two of them in one of these cases (and you wouldn't want to, it would be too heavy), but if it was just the right size, I would save a lot of space in my van. For skinnier 2x1 lights, this might be just right. Other than that, no complaints.

5
23/06/2024

[220 W ] i use these on set all the time. the remote mimics the controller on the head. its fast easy you can loock the remote so nothing changes if it gets bumped. i own 6 remotes.... perfect when i have many crew members under 6 ft. other gaffers are purchasing these remotes due to the ease and time saving. and yes i know we can invert the screen even then the dials can be out of reach

5
17/06/2024

[220 W ] This little remote is a life saver for anyone using SkyPanels on location, and adds to the awesomeness of these already awesome lights. It comes with a case, a lanyard, a long USB cable and has a strong magnet built in so you can attach the remote onto a stand. I'm going to buy three more and hope I don't have to wait two and a half months to get 'em this time!

5
29/05/2024

[110°] Solid built!!!

5
07/04/2024

[220 W ] so of course it works great!

5
30/11/-0001

[26 x 18 x 12"] Works great and good protection.

5
30/11/-0001

[34.2 lb] Purchased this for the Cream Source vortex 8, fits very well and since the vortex has no external ballast there is room for the dome diffuser and forth coming extra lenses, plus snap grid etc. very well made soft rolling case.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Arri Skypanel Rental

$16,800.00 $20,496.00

Arri Skypanel S60 Accessory Panel Bag (black)

$780.00 $1,060.80

Chimera Frame For Arri Skypanel S30 Lightbank

$789.66 $1,081.83

Arri S120 Skypanel Snoot

$1,140.00 $1,573.20

Arri Flexdoor S120 Skypanel Accessory

$2,184.00 $3,101.28

Arri Skypanel Remote Control Guide

$1,050.00 $1,669.50

Arri Skybender For S60 Skypanel Lighting

$3,153.00 $3,941.25

Arri Dopchoice Snapbox For Skypanel S360

$5,370.00 $7,893.90

Arri Flexdoor S30 Skypanel Accessory

$2,031.00 $2,904.33

Arri S60 Adapter For Skypanel X21

$1,095.00 $1,642.50

Arri Dopchoice Snapbag For Skypanel X21

$1,494.00 $2,330.64

Arri Skypanel S30 Double Vertical Yoke

$1,278.00 $1,725.30

Products You May Like

Ram Mounts Heating Module For Zebra Et6x

$515.97 $758.48

Formatt Hitech 105mm 6-stop Nd Filter

$717.18 $1,075.77

Movcam Cage Kit For Sony A7 Ii, A7r Ii, A7s Ii

$1,131.00 $1,447.68

Flm 55gx Centerball Tripod Head Srb-60 Qr Clamp

$1,053.00 $1,453.14

Feelworld S450-m 4.5" On-camera Monitor

$836.97 $1,163.39

Portabrace Bp-3 Blue Waist Belt Pack

$597.21 $770.40

Global Truss F14 Mini Square Segment 1.64'

$432.00 $522.72

Sigma 50mm F/1.4 Dg Hsm Art

$69.00 $89.70