NuGen Audio Monofilter Elements Bass Management Plug-Infrom NuGen Audio Monofilter Elements Bass Management Plug-Inis a bass management plug-in that can provide sharpness and definition to the bass frequencies of a mix. With the non-directional nature of low frequencies, and through inappropriate processing, bass parts can lack clarity and focus. To that end, the software allows for balancing low frequencies with minimum effort, allowing the bass to sound louder, more focused, and better-defined.

The plug-in has less functionality compared to the company's Monofilter, but with user friendly controls, bass energy can be quickly anchored while retaining the character of the original sound. Additionally, the software provides good playback performance on systems with separate low-frequency handling, such as club PAs, live rigs, hi-fi and 2.1 gaming systems.

Low Frequency Bass Stabilization    High-Pass Filter    Stereo Differential Spectrum Analyzer    Correlation by Frequency View    Unlimited Session Undo/Redo    A/B Comparison    Quick Start Presets    Audio Units, VST, VST3    AAX Native, RTAS    Mac OS X, Windows

Align and balance low frequencies with minimum effort

Eliminate weak, hollow bass

A|B feature for comparing tweaks easily

Linear phase high pass filter

Fix samples or restore old recordings

Unlimited undo/redo

Related Questions and Answers

Q: 1. Can you run a pair of these for a stereo mic (2 Tx, 2 Rx)? Interference issues?

A: Yes you could run a stereo pair without interference.

Q: 2. As relates to the PA2 (479), the 260 (699), and the 360 (995), what would I not be able to do with these units absent an RTA-M microphone?

A: All units mentioned provide similar functionality with varying degrees of feature sets. The dbx DriveRack VENU360 Loudspeaker Management System expands on the feature set of the dbx DriveRack 260 and dbx DriveRack PA2 with more crossover capabilities, more bands for EQ, and more I/O and signal processing.

Q: 3. Is there a audio output that will handle 5.1 Dolby sound? (output to AV receiver)

A: No, the Xantech HDMI 2.0 4x2 Matrix with Audio Breakout and EDID Management does not output 5.1 Dolby sound.

Q: 4. Can you charge the transmitter/receiver while it is in operation?

A: Thank you for your question. You are unable to charge the receiver or transmitter while it is in use. They do last an average of 5 hours on a full charge to get through most performance situations.

Q: 5. Will this work with a Deity D3 Pro and a Blackmagic Pocket Cinema 4K?

A: Yes the Beachtek DXA-CINE will work with a Blackmagic Pocket Cinema 4K.

Q: 6. Can U3C be used even with a dynamic microphone that doesn't need phantom power with phantom power switched off?

A: The Xvive Audio U3C Set Wireless Plug-On System for Condenser Microphones is only meant for condenser microphones, and the manufacturer specifically advises against connecting dynamic microphones to this system. It does not appear that phantom power can be switched off on this version and therefore has the potential to damage dynamic microphones.

Q: 7. It seems the receiver is rechargable. I'm plugging it into a board with global phantom power. Will this damage the receiver or affect the sound negatively?

A: That should not present a problem or degrade your sound.

Q: 8. Is it powered by battery or over cable?

A: This audio camera adapter is to be powered by an external battery usiing a 11 to 18 V, via 2-pin LEMO connection.

Q: 9. Does it work with DSLR and Mirrorless cameras?

A: This camera audio adapter is made specifically for cinema cameras with particular connections. I would consider the Beachtek DXA-MICRO-PRO PLUS Active Audio Adapter for DSLRs and Camcorders, BH #BEDXAMICROPP, which has a 3.5mm mic level output that is more appropriate for DSL or Mirrorless camera mic inputs.

Q: 10. Can U3C provide phantom power to Rode RTG3 microphone?

A: Yes, the Xvive Audio U3C Set Wireless Plug-On System for Condenser Microphones (2.4 GHz) can provide phantom power to the NTG3.