Designed to connect to virtually any device, the walnut Audioengine HD6 Bluetooth Speaker System Walnut Pairprovides an analog stereo RCA input, an optical audio input, and 1/8" input; Bluetooth connectivity with aptX HD allows for wireless connectivity with your compatible devices. The speakers consist of a 5.5" woofer and a 1" tweeter and output up to 50W per channel RMS, or 75W per channel peak. For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. In addition to the included speaker wire, an 1/8" audio cable, RCA audio cable, magnetic removable grilles, and IR remote are also included.

Up to 50W per Channel RMS Power    Bluetooth Audio Streaming    5.5" Woofer & 1" Tweeter per Speaker    Optical, Stereo RCA, 1/8" Inputs    Includes Removable Grilles & IR Remote

The speaker cabinets, drivers, bass port designs, amplifiers, and passive crossovers are all tuned together for the HD6. This, in turn, helps make for a more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. Audioengine builds all this into the left speaker cabinet to make it easy to connect your smartphone, tablet, computer, display, network player, or any other audio product.

Audioengine has taken features from the B1 aptX HD Bluetooth Receiver and the D1 24-bit DAC, and combined some of this circuitry inside the HD6.

The Bluetooth built into the HD6 powered speakers features aptX HD coding, which is a Bluetooth audio codec designed to help provide enhanced sound quality. And even if your phone or tablet doesn't have aptX HD, the HD6 Bluetooth solution is backwards-compatible with SBC and AAC codecs, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music.

The HD6 offers a Bluetooth solution that has up to a 100' range for multi-room use, with virtually no degradation in audio quality.

The HD6 Bluetooth receiver and optical input both utilize the AKM AK4396A DAC, which is designed to provide low noise and high fidelity. The optical input configures the DAC as a bit-perfect 24-bit DAC, which will process sample rates up to 192 kHz natively. For Bluetooth, the AK4396A is used as an upsampling DAC and will pad all bit depths to 24-bits, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the AK4396A, the fact that digital signal is upsampled to 24-bits, and the added benefit of onboard triple redundancy power source conversion and filtering, the HD6 Bluetooth implementation is engineered to present impressive low noise and low distortion characteristics.

The amplifiers in the HD6 are located in the left speaker and feature class A/B analog monoblock design. This is designed to provide high-quality audio and greater flexibility, and all the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

Audioengine uses ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters are engineered to hold up well under high power, and the edge-driven design helps provide a smooth response. The woofers are Kevlar woven glass aramid composite with rubber surrounds. The strength of Kevlar means the woofer retains its shape when being driven at high levels. The HD6 woofers are housed in cast aluminum frames, which help provide high rigidity and increased heat dispersion.

Audioengine uses gapless-core toroidal transformers, which have a tighter radiated magnetic field, translating to lower noise. They are lighter than standard "EI" transformers, and also generate less heat.

The HD6 includes detachable grilles that are held in place with hidden neodymium magnets for a clean look.

• Dual audio inputs and full-range variable output
• Optical, RCA, and 1/8" inputs allow for easy connection to a variety of sources, including a turntable or TV
• Threaded inserts to secure speakers to stands
• Passive crossovers
• Aluminum remote control

Related Questions and Answers

Q: 1. Can the be played with 240V power supply?

A: Yes, these speakers are dual voltage. 115/240VAC, 50/60Hz selectable.

Q: 2. Are the HD6's magnetically shielded?

A: No. Not necessary when placed next to flat panel monitors or televisions.

Q: 3. Can it play multiple audio streams via different devices, simultaneously through Bluetooth?

A: The Audioengine HD6 Bluetooth Speaker System (Walnut, Pair) BH #AUHD6WAL is capable of streaming just one signal at a time.

Q: 4. Does this system have an optical input ? - I intend to use this with my 32 " samsung TV-(which is being used as a computer . monitor). Sadly, the TV has no RCA , or headphone output, only optical one)

A: Unfortunately this model doesn't have optical connections.

Q: 5. Has anyone used these in conjunction with a Dragonfly DAC?

A: I tried these with a Mac, and the Dragonfly black, and noticed a definite, but subtle improvement in overall sound quality. I was unable to test the better models.

Q: 6. Can this be used wirelessly?

A: This is a Bluetooth speaker. So yes it can be used wirelessly.

Q: 7. Do these work with any of your wall mounts?

A: These active speakers are not designed for typical speaker wall mounts. These should work: Adjust the width of the mount with the telescoping base to fit nearly any speaker. Designed for any bookshelf speaker including speakers without threaded inserts or keyhole slots. Peerless-AV Bookshelf Speaker Mount (26 lb Capacity, 2-Pack BH #PESPK26 - https://bhpho.to/2RsxsjD

Q: 8. What’s the power connection 220 or 110

A: The Audioengine A2+ Wireless Bluetooth Speaker System power input is 100 to 240 VAC, 50 / 60 Hz.

Q: 9. working with limited space, 8" shelf but has 12" depth & 4ft width. can these speakers be placed on their side and still work good? also does it come with anything to decouple the speakers from a tv stand/shelf?

A: It is not recommended but sure you can do that and they will still work good. The A5+ does not come with any attachments for a stand, they are made to sit on any flat surface.

Q: 10. Can the Audioengine B2 be combined with other Audioengine speakers or other Bluetooth speakers to create a party type system?

A: No. This speaker cannot be connected in a party-chain fashion to other bluetooth speakers.