The 10' Stereo 1/8" Male Mini-Jack to XLR Male Cable 10'can connect the line output of devices such as a computer, camera, smartphone, wireless receiver, or MP3 player to the XLR input of a mixer, PA system, audio recorder, or camcorder. It merges both channels of the stereo output from your playback device into a mono signal for connection to an XLR input.

This durable cable is engineered for protection against EMI, RFI, and static noise while maintaining flexibility. The cable features a gold-plated 1/8" (3.5mm) right-angle stereo mini-jack with molded strain relief, and an XLR connector with chuck-style strain relief made by Rean. The 24-gauge OFC conductor, copper spiral shielding, and PE insulation result in a quiet cable with improved conductivity, assuring pure transfer of audio signals.

Plug MP3 Player or PC into Mixer or PA    Plug Wireless Receiver into Mixer or PA    Copper Spiral Shielding Reduces Noise    24 AWG OFC Conductors with PE Insulation    PVC Jacket for Protection    Gold-Plated R/A 1/8" Stereo Mini-Jack    Rean XLR Connector with Strain Relief

Copper spiral shielding with more than 90% coverage provides advanced protection against RF and EM interference as well as static noise

24 AWG OFC conductors with PE insulation to improve conductivity

PVC jacket provides protection while maintaining flexibility

Gold-plated 1/8" (3.5mm) right-angle stereo mini-jack with molded strain relief will connect to line-output devices such as computers, cameras, smartphones, MP3 players, and wireless receivers

XLR connector with chuck-style strain relief by Rean will connect to the XLR input of devices such as mixers, PA systems, audio recorders, or camcorders

Related Questions and Answers

Q: 1. Is 50' too long for connecting a lavalier mic to a video camera? (The lav. has its own battery, camera port is powered - if that makes a difference for a powered mic. Lav. is: Deity B&H: DEVLAV.) TY

A: 50 feet is longer than the the common extension cables that are male to female and 25-feet long like the Pearstone 3.5mm Stereo Male to Female Extension Cable - Black, 25' (B&H # PEMMSB125B), but the 50-foot cable could work without any problems. Give it a try and if you find that it's noisy or the signal is weak, then use a shorter cable.

Q: 2. What is the distance of the spread of 2 XLRs from the Y-junction?

A: It splits in the middle, so approximately 5 feet on each end, meaning the spread would be approximately 10 feet. Best regards, Hosa Support.

Q: 3. Is shielding/xlr design strong enough for this to be run next to a power strip or two (hehe) and have less distortion than a standard or high quality 3.5mm cable?

A: No guarantees - but it very well may help.

Q: 4. Can this cable be used to run line level audio from a mixer to the camera?

A: Yes, you can use the Mogami Gold Stereo Mini Male to 3-Pin XLR Female Microphone Cable to send line level audio from a mixer to a camera, but you must use an in-line attenuator such as the Hosa Technology ATT-448 In-Line Switchable Input Attenuator with 20, 30 or 40dB of Attenuation (B&H # HOATT448) to pad the line level signal so it does not overload the camera's mic input. The ATT-448 can connect directly to the mixer or you can use an additional XLR cable between the mixer and attenuator if you need more length.

Q: 5. Is this cable suitable to connect a Tascam 70D recorder line out to a DLSR camera mic line in?

A: Yes, this could be used to connect the 70D to a DSLR with a 3.5mm mic input. Please make sure the 70D output level is set as camera out when making that connection.

Q: 6. Will these also work as an OUT from a mixer (using the L&R main outs) to the stereo IN on a ATEM mini pro?

A: Yes you can do go from the main outs on a mixer into the Atem Mini Pro using the Kopul Stereo Mini to Dual 1/4- Y-Cable (Male, 6') but you would also need to go into the Atem Mini Pro software and change your mic inputs to line inputs.

Q: 7. Will this cord work with an iPad for shooting video?

A: No! It will send you audio signal to where ever you plug it in, which would have to be that accepts XLR connectors. This is an audio cable and will not work with digital video, unless you are transferring or sending the audio signal which can be separated from the video with pro equipment. Based on your question, you probably are not a professional. By the way, the industry term is cable . Cord refers to lamp cord, or what's called zip cord. It's used on all sorts of consumer products, but is not suitable for anything other than the power source, that is plugging into an electrical outlet.

Q: 8. Will this cable carry phantom power? I purchased some from another source and they do not work with my condensor tabletop microphones.

A: They carry phantom power with Crown PCC's just fine. That's all I've tried them with.

Q: 9. will this work with the lavalier Sennheiser ew 112-p G3 receiver?

A: The Sennheiser EW receiver unit requires a locking connector for proper operation. This cable is not compatible. Kopul does offer a cable the ROC-LM2. Sennheiser also offers an XLR cable identical to the one that ships with the system, the CL-100

Q: 10. what size is the external mic jac on a sony ax700?

A: The mic input on the Sony AX700 is 1/8" / 3.5 mm.